willy9

Hello, I have some OEM C6 Z06 wheels that I bought for my WS6 but I have been thinking of putting them on my 1995 step side single cab with a 5/7 drop. I know I'm going to need spacers but what thickness to make the offset correct. These are OEM 19x12 on the rears with 345s, 18x9.5 up front. Has anyone done something similar? If so post pics.

silver-mod-o

iTrader: (15)

Different bolt circle I believe... GMT800 trucks are on a 5-5" circle for 2WD, C6 Corvette should be the more common 5-4.75"... If you have a 5-4.5" that's a Ford pattern...

willy9

I know that, I meant adapter not spacer, what would be a good offset to run?

silver-mod-o

iTrader: (15)

That I couldn't tell ya... Best way would be to get a straight edge and tape and figure it out from scratch... I don't think this is really one of those "known" wheel/tire combinations lol.

willy9

Bump....

Oscar Tamez

Did you figure it out?