boost+traction=
#61
single digit dreamer
iTrader: (6)
i want the drums so i can fit 15" wheels. after looking around town it seems there are a pile of those 9.5's around so i am sure i can get one with decent brakes on it still and in my 373 gear ratio too. probably cost me about $500 for the rear with about 100k on it. $450 for the posi. $20? for the perches. $300 for a pair of axles. gasket and oil. i am prety sure $1300 will get it done and it should be strong.
#62
TECH Senior Member
iTrader: (6)
Join Date: Jul 2005
Location: Decatur, AL
Posts: 5,257
Likes: 0
Received 0 Likes
on
0 Posts
Found the company that makes the rear brace kits for the 10 bolt rears. Same people that make the Ultimate covers...go figure.
http://www.lpwracing.com/p_axletubebrace.asp
This is what I will be doing to mine. I may just make my own.
I also found a write-up on installation on a mustang 8.8.
http://www.corral.net/projects/deepfreeze/dflpw.html
http://www.lpwracing.com/p_axletubebrace.asp
This is what I will be doing to mine. I may just make my own.
I also found a write-up on installation on a mustang 8.8.
http://www.corral.net/projects/deepfreeze/dflpw.html
#64
TECH Fanatic
iTrader: (12)
Originally Posted by TurboGibbs
Found the company that makes the rear brace kits for the 10 bolt rears. Same people that make the Ultimate covers...go figure.
http://www.lpwracing.com/p_axletubebrace.asp
This is what I will be doing to mine. I may just make my own.
I also found a write-up on installation on a mustang 8.8.
http://www.corral.net/projects/deepfreeze/dflpw.html
http://www.lpwracing.com/p_axletubebrace.asp
This is what I will be doing to mine. I may just make my own.
I also found a write-up on installation on a mustang 8.8.
http://www.corral.net/projects/deepfreeze/dflpw.html
#65
TECH Senior Member
iTrader: (6)
Join Date: Jul 2005
Location: Decatur, AL
Posts: 5,257
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GMracer
hmm doesnt seem to hard, but then again doesnt seem to expensive either