4L80E Swap Crossmember Mod (pics)
#31
TECH Enthusiast
This was mine before the final trim and paint
After triming and painting
Installed....Rubbed the 2.75" exhaust tubing, so I had to message the tubing with a torch and a big hammer.
After triming and painting
Installed....Rubbed the 2.75" exhaust tubing, so I had to message the tubing with a torch and a big hammer.
#34
TECH Regular
Join Date: Sep 2007
Location: Claremont, ON Canada
Posts: 461
Likes: 0
Received 0 Likes
on
0 Posts
#35
TECH Senior Member
iTrader: (45)
Join Date: Jun 2005
Location: Hennessey, Oklahoma
Posts: 9,439
Likes: 0
Received 11 Likes
on
5 Posts
Prolly be over a month before I get everything to start building these.. I sent this one to a guy to be test fitted.. Once he puts it in and it fits I'll get the brackets laser cut. They'll prolly be $150-$160 range. And yes I'll build them for the Nnbs as well.
#36
TECH Regular
Join Date: Sep 2007
Location: Claremont, ON Canada
Posts: 461
Likes: 0
Received 0 Likes
on
0 Posts
Prolly be over a month before I get everything to start building these.. I sent this one to a guy to be test fitted.. Once he puts it in and it fits I'll get the brackets laser cut. They'll prolly be $150-$160 range. And yes I'll build them for the Nnbs as well.
#37
Teching In
Join Date: Nov 2003
Location: rochester NY
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Prolly be over a month before I get everything to start building these.. I sent this one to a guy to be test fitted.. Once he puts it in and it fits I'll get the brackets laser cut. They'll prolly be $150-$160 range. And yes I'll build them for the Nnbs as well.
#39
How far back does one need to extend the cross member for a 4WD GMT800? I'm building up my 2002 Yukon getting ready for a 4l80e swap. I thought I read 30mm, but thats only 1 inch and change and seems too short.
Thanks!
Thanks!
Last edited by tgui; 12-22-2014 at 12:10 PM.