4L80E Swap Checklist
#1
4L80E Swap Checklist
Just trying to make sure I get EVERYTHING before I start the swap.
I have:
4L80E with stock dip stick and transmission lines.
Speartech 4L60 to 4L80 conversion harness.
Crank Spacer
Hughes 3500 Stall which appears to have holes drilled for 11 and 11.5 bolt pattern.
I need:
A good transmission cooler, opinions welcome!
Crossmember....Will one out of a 2500HD work or will I have to modify?
4L80E Transmission mount.
Flexplate... Do I need one if my converter will bolt up?
4L80E Yoke.
Reprogram computer to control transmission.
Am I missing anything?
I have:
4L80E with stock dip stick and transmission lines.
Speartech 4L60 to 4L80 conversion harness.
Crank Spacer
Hughes 3500 Stall which appears to have holes drilled for 11 and 11.5 bolt pattern.
I need:
A good transmission cooler, opinions welcome!
Crossmember....Will one out of a 2500HD work or will I have to modify?
4L80E Transmission mount.
Flexplate... Do I need one if my converter will bolt up?
4L80E Yoke.
Reprogram computer to control transmission.
Am I missing anything?
Last edited by GMCHammer; 03-01-2007 at 03:18 AM.
#3
You're probably not getting any responses because this has been covered about 1000000000000 times
https://www.performancetrucks.net/fo...earchid=438559
https://www.performancetrucks.net/fo...earchid=438559
#4
Yes and I searched but still couldnt find some of the answers I was looking for. I think I have everything together was just trying to get a second opinion before I rip the tranny out of the truck and find out I will have to put it back in cause im missing something.
Thread
Thread Starter
Forum
Replies
Last Post
lycominghunter
GM Drivetrain & Suspension
5
07-29-2015 04:24 PM
4l80, 4l80e, c10, conversion, g8, gto, harness, hemi, hughes, lines, mount, ram, speartech4l60, swap, transmission