i did a 4/6 drop on my 01 nbs stepside and used DJM 4"lca upfornt with stock springs. i've been having major camber issues til now, but it will be taken care of sonn. some suspension shops don't like the 4"lca. don't know why. do you guys think the same?


it's been awhile since i've been here, i missed you guys!!
Sup Jason (01j'siverado) and Jeff (twankydeuce)!!!!

 

No problems with mine. I know some trucks have alignment issues with them though. They do sell the upper control arms to help with alignment though.

 

what's the best UCA? or what would work for mine?

 

DJM 4 LCA here, no alignment issues

Go DJM UCA's if you have too

 

whats up man! If your having that much alignment problems, get a set of djm uca's and that should allow you to align alot better

 

yeah i had alignment issues with my 4" lca and half a coil cut off, i got the uppers and they fixed it right up.

 

Wassup Rein!!! Have you talked to Alan to see if he could align it any better?

 

sup Jason!! i called him awhile back. he said he can't do anything about it.
i might try the DJM upa. i was just actually looking at the Jegs website and found a camber kit by SPC. do you know if that would work?

 

A friend of mine had problems getting his aligned with DJM lcas and ucas. He switched to a 2" spindle and 2" coil and it solved the problem.