FORCED INDUCTION Turbos | Superchargers | Intercoolers | H2O/Meth Injection
Sponsored by:
Sponsored by:

Yella terra rockers

Old Mar 18, 2017 | 11:45 AM
  #1  
MattOKC's Avatar
Thread Starter
Staging Lane
 
Joined: Feb 2015
Posts: 81
Likes: 0
From: Yukon Oklahoma
Default Yella terra rockers

I bought a set of Yella Terra YT6624 for $350. I've been reading that they have failure issues. They are new in the box. I'm running the trip 12 cam with PAC 1218 springs. 5.3 with 13psi daily driver. I also have a trunnion upgrade kit still in the box. Which rockers would be best? I'm going all forged this summer for more boost.
Reply
Old Mar 18, 2017 | 11:51 AM
  #2  
MattOKC's Avatar
Thread Starter
Staging Lane
 
Joined: Feb 2015
Posts: 81
Likes: 0
From: Yukon Oklahoma
Default

They are the older style
Attached Thumbnails Yella terra rockers-img_0041.jpg  
Reply
Old Mar 18, 2017 | 12:31 PM
  #3  
zero2sixT's Avatar
TECH Enthusiast
iTrader: (4)
 
Joined: Feb 2009
Posts: 723
Likes: 2
From: Deer park, TX
Default

You running a high ramp rate cam?
Reply
Old Mar 18, 2017 | 01:03 PM
  #4  
MattOKC's Avatar
Thread Starter
Staging Lane
 
Joined: Feb 2015
Posts: 81
Likes: 0
From: Yukon Oklahoma
Default

Its stock48's 212/212 112
Attached Thumbnails Yella terra rockers-img_0043.jpg  
Reply
Old Mar 18, 2017 | 01:14 PM
  #5  
MattOKC's Avatar
Thread Starter
Staging Lane
 
Joined: Feb 2015
Posts: 81
Likes: 0
From: Yukon Oklahoma
Default

Open load on spring is 318 lbs
Reply
Old Mar 18, 2017 | 02:04 PM
  #6  
zero2sixT's Avatar
TECH Enthusiast
iTrader: (4)
 
Joined: Feb 2009
Posts: 723
Likes: 2
From: Deer park, TX
Default

Most failures I've read had a high open pressure spring and xer lobes.

I run yts. Haven't had any problems. I'll check them when I get home to see where the stamp is. They're off the engine right now
Reply
Old Mar 18, 2017 | 02:15 PM
  #7  
MattOKC's Avatar
Thread Starter
Staging Lane
 
Joined: Feb 2015
Posts: 81
Likes: 0
From: Yukon Oklahoma
Default

Thanks
Reply
Old Mar 18, 2017 | 06:38 PM
  #8  
zero2sixT's Avatar
TECH Enthusiast
iTrader: (4)
 
Joined: Feb 2009
Posts: 723
Likes: 2
From: Deer park, TX
Default

I have the new style, the 1.7 stamp is offset.

I think you'll be ok. That is a pretty mild cam
Reply
Old Mar 18, 2017 | 08:56 PM
  #9  
MattOKC's Avatar
Thread Starter
Staging Lane
 
Joined: Feb 2015
Posts: 81
Likes: 0
From: Yukon Oklahoma
Default

Ok thanks
Reply
Old Mar 21, 2017 | 07:49 PM
  #10  
andrewb70's Avatar
Teching In
 
Joined: Dec 2006
Posts: 35
Likes: 1
Default

I would run stock rockers with the grunion upgrade. The stock rockers are generally lighter on the tip and with that cam will never experience any issues, especially with a grunion upgrade.

Andrew
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:19 PM.