supershift67

iTrader: (1)

I have a 2007 6.0 with a mp122 I bought off a member here and I am finally going to install it. I would like to run e85 but need to know which injectors to buy. this is in a 67 chevelle. The engine is all stock but I may stick a cam in it but not right away.

Beatdown Z

iTrader: (18)

How much boost and/or rwhp are you shooting for?

FIC 96'ers should work pretty good, imo.

supershift67

iTrader: (1)

I would like to have 550 rwhp but I dont know if I can do it with what I have.Any suggestions are appreciated. There is a 2.9 pulley on the charger right now and I still have to put together the intercooler set up.

TX Tahoe Z71

iTrader: (28)

I am at about 90% IDC with my 75#'ers with E85 on my 5.3, GT2-3 cam, MP112 with 3.0" pulley (probably about 8-10psi). Call Jon at Fuel Injector Connection, that's where I got mine speced out.

AndysC3

iTrader: (14)

Yea, I wouldnt run anything smaller than an 80. What fuel pump do you have?

supershift67

iTrader: (1)

I have a walbro 255 fuel pump but I plan on running 2 of them. Thanks for all the input. will the 80lb siemens deka injectors work with e85?

Beatdown Z

iTrader: (18)

Yea, they'll work.

supershift67

iTrader: (1)

do I need to change my MAP sensor with this or is the stock one o.k.??

02'Z71ONDUBZ'

iTrader: (8)

Swap the map for a 2-bar sensor and trash the MAF as well, go with a speed density tune.

supershift67

iTrader: (1)

Thanks for the help guys.