Anyone know a reputable shop on the east coast that is capable of tearing down my motor and doing it up nice.. Would like to swap in some lower compression forged pistons, titanium valves, upgraded valvesprings, forged c-rods, build a custom intake manifold, and do a sick underhood setup for twins so i'll need custom exhaust manifolds as well.. already have a 6k built tranny that should hold atleast 650 rwhp but it if end up going over that so be it if it blows it's warrantied for atleast a yr

I wanna be into the deep 10's on 14-16lbs of boost who is up to the challenge?

 

I have to say, my that is one sick Nissan you have going there. Very good forethought on getting the drive train together before going forced induction. Those have 5 speed Transmissions correct?

 

Where are you located?

 

East Coast Supercharging, Cartek

 

located in n.c. all the crappy shops here i've called only wanna TOUCH RUSTANGS..

 

Damn man, you've come A LONG way since i've talked to you last. and now shooting for mid 10's!!! let me know when you make it back this way.

 

both only work on GM stuff. I deal with the first on a close to daily basis, I dealt with the second once before the first

should say enough.