Looking at possibly upgrading my feed line. What size feed line would be good for 900rwhp and where could I find feed lines with pushlock on one end for the tank?

 

Stock size has been proven to go past 1000rwhp, but if your dead set on doing so go -8 and Nasty8 on Tech (sponsor) sells the quick connects that your looking for.

 

IU would do -10. mainly because local shops, at least in my area seem to use it, and keep it in stock as well as the fittings

 

-10 is old school carb. Not needed for hi psi fuel system.

 

another reason, was I was using a high dollar fuel pump, and making it suck out of the stock tank.

 

Stock lines don't feed 1000 hp in itself and the people that have made that use a crap load of meth to supplement. Old school or not -10 works on my set up too.

 

If I recall, Parish was on stock fuel lines as was Stock48 to mention a few. And yes they were definitely on meth as you stated!

 

How long was parish on stock lines?

 

I was actually looking at going E85 over meth, not right now but eventually. If meth fails I'm screwed and E85 seems to be like majic but I'm mainly doing it for detonation and such cause this Houston weather is horrible, I won't even drive my drive during the day its so hot.

 

-10 an will supply the mass of fuel u will need at high hp applications, u can push the limits with stock lines but why take that chance? U might hit 1000 hp on stock lines but for how long?!?! I went big with 10 an to begin with and if u r even considering e85 it's a no brainer