FORCED INDUCTION Turbos | Superchargers | Intercoolers | H2O/Meth Injection
Sponsored by:
Sponsored by:

STS Question

Thread Tools
 
Search this Thread
 
Old May 15, 2006 | 05:49 PM
  #1  
MON-E-pIT's Avatar
Thread Starter
Staging Lane
 
Joined: Nov 2005
Posts: 64
Likes: 0
Default STS Question

My truck is a 2001 silverado 1500ext 5.3 4x4 and I am thinking about purchasing an STS Turbo system. However, I have alot of money in my current exhaust system (was going to spray). I have ASM logtubes custom y-pipe, to single 3" with highflow cat and aerochamber dumped over the axle ,all stainless so i would really like to keep it.
My question is, will i be able to keep the ASM's and the rest of my exhaust except for the muffler if I run the STS kit?
Reply
Old May 15, 2006 | 06:18 PM
  #2  
TIM Z's Avatar
11 sec. Truck Mod
iTrader: (12)
 
Joined: Dec 2005
Posts: 9,736
Likes: 4
From: OH IO :(
Default

why yes, yes you can!
Reply
Old May 15, 2006 | 06:19 PM
  #3  
quicksilverado's Avatar
TECH Junkie
iTrader: (8)
 
Joined: Dec 2003
Posts: 3,944
Likes: 1
From: Marietta, Ga.
Default

I had the same setup and it worked out fine. You will have to lose the muffler. You can remove the cats also and it will spool up about 300 rpm faster.
Reply
Old May 15, 2006 | 06:21 PM
  #4  
MON-E-pIT's Avatar
Thread Starter
Staging Lane
 
Joined: Nov 2005
Posts: 64
Likes: 0
Default

cool, so there will be no fittment probs with the headers and the turbo piping
Reply
Old May 15, 2006 | 06:25 PM
  #5  
MON-E-pIT's Avatar
Thread Starter
Staging Lane
 
Joined: Nov 2005
Posts: 64
Likes: 0
Default

oh, and two more questions, is there alot better gains with port/polish heads and small camwith the turbo, and what is the best way to dump the intercooler and run 100%meth.
Reply
Old May 15, 2006 | 06:28 PM
  #6  
TIM Z's Avatar
11 sec. Truck Mod
iTrader: (12)
 
Joined: Dec 2005
Posts: 9,736
Likes: 4
From: OH IO :(
Default

the cam i have works great with my turbo, not sure what you mean by dumping the intercooler
Reply
Old May 15, 2006 | 06:30 PM
  #7  
MON-E-pIT's Avatar
Thread Starter
Staging Lane
 
Joined: Nov 2005
Posts: 64
Likes: 0
Default

isnt there a way to just not run an intercooler and run some type of full meth or alcohol injection? or am i just being dumb again
Reply
Old May 15, 2006 | 06:34 PM
  #8  
TIM Z's Avatar
11 sec. Truck Mod
iTrader: (12)
 
Joined: Dec 2005
Posts: 9,736
Likes: 4
From: OH IO :(
Default

Originally Posted by MON-E-pIT
isnt there a way to just not run an intercooler and run some type of full meth or alcohol injection? or am i just being dumb again
yes you can run only meth and no intercooler, but w/o an intercooler you must always make sure you have meth or boom! you can also run both for max power.
Reply
Old May 15, 2006 | 07:49 PM
  #9  
kbracing96's Avatar
TECH Senior Member
iTrader: (26)
 
Joined: Jul 2004
Posts: 9,485
Likes: 31
From: Oakland, OR
Default

I run both . The cooler for normal driving and towing and the Meth for octane, so I can run cheep gas and still have descent timing

If I could only do 1, I'd to Meth. It cools and an intercooler can't add octane.
Reply
Old May 16, 2006 | 04:11 PM
  #10  
Kerr's Avatar
TECH Enthusiast
 
Joined: Aug 2005
Posts: 732
Likes: 0
From: VA
Default

we put one on a friend GMC 4x4 with the 5.3 motor. it made just shy of 400 wheel hp if i remember correctly. Ill double check tonight.
Reply



All times are GMT -5. The time now is 06:48 AM.