FORCED INDUCTION Turbos | Superchargers | Intercoolers | H2O/Meth Injection
Sponsored by:
Sponsored by:

STS Checklist

Old Jan 12, 2007 | 02:40 PM
  #1  
westbayou's Avatar
Thread Starter
Teching In
 
Joined: Nov 2006
Posts: 41
Likes: 0
From: Bradenton, FL
Default STS Checklist

Ok guys, I think I am ready to do my install, but I want to make sure I am not missing anything. Double check me if you don't mind?

STS Kit
Intercooler
tial BOV
Boost Gauge
Electronic Boost Controller
NGK sparkplugs
Dynojet Wideband Commander
Sonnax servos for the tranny
Predator with STS tuning uploaded (Diablosport will be fine tuning this afterwards)

Anything I didn't think of? My credit card is still smoking at this point.....
Reply
Old Jan 12, 2007 | 04:11 PM
  #2  
Ruffrider5.3's Avatar
TECH Apprentice
 
Joined: Jun 2005
Posts: 300
Likes: 0
From: Tampa,FL
Default

Hey man I am near by if you need any hands on help.....you gotta supply the beer though, ohh yeah, Im IRISH!!!!
Reply
Old Jan 12, 2007 | 06:22 PM
  #3  
adam1803's Avatar
TECH Fanatic
iTrader: (65)
 
Joined: Jun 2006
Posts: 1,187
Likes: 1
From: Tyndall AFB / Panama City, FL
Default

i'd add a fuel pump and injectors if i were you, 5psi is really pushing it on the stock equipment and its only a matter of time (very small amount of time) before you will want more boost. For about an extra $400 you can tune it on 8-10psi and be done with it, you can always back down on the boost if you want too.
Reply
Old Jan 13, 2007 | 09:30 AM
  #4  
westbayou's Avatar
Thread Starter
Teching In
 
Joined: Nov 2006
Posts: 41
Likes: 0
From: Bradenton, FL
Default

I forgot to put those on the list, but I do have them. I went with 42lb injectors, and an MSD boost-a-pump.
Reply
Old Jan 13, 2007 | 10:26 AM
  #5  
Avsfan's Avatar
On The Tree
 
Joined: Jan 2006
Posts: 104
Likes: 0
From: Colorado Springs CO.
Default

That thing should be wicked fast in that small TBSS... What is the weight on one of those???
Reply
Old Jan 13, 2007 | 01:15 PM
  #6  
westbayou's Avatar
Thread Starter
Teching In
 
Joined: Nov 2006
Posts: 41
Likes: 0
From: Bradenton, FL
Default

If I remember correctly, about 4600lbs. Shooting for a solid 500hp at the wheels on about 7.5psi. Gonna run 5-5.5psi on the street and flip the switch when I need to humble someone. Another guy with this setup ran a 12.9 at 113mph, so I figure if you can get out of the hole mid-12's are possible. Guess we will know soon enough....
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
nabozny21
FORCED INDUCTION
6
Oct 17, 2015 07:47 PM
jeff.ellis
FORCED INDUCTION
6
Aug 18, 2015 10:34 PM
ZO6Ted
GMT K2xx Trucks General Discussion
9
Aug 12, 2015 07:50 PM
Deceptarado
New Members
0
Jul 8, 2015 05:24 PM
chris99gmc
GM Engine & Exhaust Performance
17
Dec 4, 2004 05:50 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:30 PM.