Radixed LQ9
#1
Launching!
Thread Starter
Join Date: Jul 2004
Location: North TX
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
Radixed LQ9
I just bought a Radix and I am wondering how boost will my motor handle. For now I think I am going to run the stock pulley but I am getting a 3.1" and a 2.9". I would like to up the boost and have Allen Nelson tune it sometime this summer. How much will the transmission handle without ANY problems? This truck is my daily driver so I need it to be reliable.
#2
TECH Junkie
Invest in a wideband and scaning software to monitor KR and AFR to make sure you don't damage your motor.That said you shouldn't have any problem with 10 or 11lbs of boost.
#3
TECH Resident
iTrader: (10)
Join Date: Oct 2005
Location: Cincinnati, Ohio
Posts: 948
Likes: 0
Received 0 Likes
on
0 Posts
You're not gonna be able to run 10-11 lbs in a 10.5 to 1 motor without a boost cooler. Even then that may be a little high. As far as tuning goes Brian at PCM4less beat Nelson by .01 in the CHP Supercharged Silverado SS article. As a bonus PCM4less is $250 for the tune and $50 for additional updates + $15 to ship and he can supply a core ofr you. Have you checked around at www.SilveradoSS.com ? Lots of Radix info there. I have a 03 SS and just bought a radix for it, but I haven't installed it yet. Later
Dave
Dave
#4
TECH Veteran
The LQ9 will handle all the boost a radix will throw at it. I've tested it right down to a 2.8" pulley and a couple have ran the 2.75" pulley on it. On 04' and newer though you're going to find that anything smaller than a 3.0" pulley you're going to be running out of injector and running straight into lean above 5k or so. The trans with a good shift kit should have no problem handling the power of a radix'd 6.0L.
#6
Tin Foil Hat Wearin' Fool
iTrader: (36)
Originally Posted by Bowtie70SS
You're not gonna be able to run 10-11 lbs in a 10.5 to 1 motor without a boost cooler. Even then that may be a little high. As far as tuning goes Brian at PCM4less beat Nelson by .01 in the CHP Supercharged Silverado SS article. As a bonus PCM4less is $250 for the tune and $50 for additional updates + $15 to ship and he can supply a core ofr you. Have you checked around at www.SilveradoSS.com ? Lots of Radix info there. I have a 03 SS and just bought a radix for it, but I haven't installed it yet. Later
Dave
Dave
#7
TECH Fanatic
Join Date: Jul 2005
Location: Galesburg Il
Posts: 1,396
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 1slow01Z71
Your statement about Nelson is VERY misleading. In that article the owner of pcm4less was there tuning it IN PERSON and Nelsons tune was a MAIL ORDER tune extremely unfair comparison and just goes to show how well Allen does his job and how badly pcm4less does theirs. Dont show a one sided story if you post something show ALL the facts one way or the other
Trending Topics
#8
Launching!
Thread Starter
Join Date: Jul 2004
Location: North TX
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
I will be taking the 5 hour drive to San Antonio to have Allen tune it in person. No mail order tunes here.
Zippy,
Just a shift kit will improve the reliability of my tranny?
Zippy,
Just a shift kit will improve the reliability of my tranny?
#10
TECH Veteran
Originally Posted by skinnyVHO
I will be taking the 5 hour drive to San Antonio to have Allen tune it in person. No mail order tunes here.
Zippy,
Just a shift kit will improve the reliability of my tranny?
Zippy,
Just a shift kit will improve the reliability of my tranny?
Yes, my customers have had great success with a shift kit only on a 65E.