FORCED INDUCTION Turbos | Superchargers | Intercoolers | H2O/Meth Injection
Sponsored by:
Sponsored by:

Post your Timing and PSI

Thread Tools
 
Search this Thread
 
Old Jun 24, 2013 | 10:32 PM
  #1  
TRD_Tundra's Avatar
Thread Starter
Launching!
 
Joined: Jul 2012
Posts: 249
Likes: 0
From: Houston
Default Post your Timing and PSI

Want to see what everyone else is running.
2006 Silverado 76mm front mount Stock 5.3, cam, head studs, ls9 head gaskets, 4" intercooler.

I'm at 13.5* timing at 11-12psi w/ 93 octane and single nozzle straight meth.
Reply
Old Jun 24, 2013 | 10:38 PM
  #2  
GMCtrk's Avatar
TECH Senior Member
iTrader: (27)
 
Joined: Jul 2004
Posts: 12,275
Likes: 17
From: Dallas
Default

14.5* on 10 psi. Straight e85. Tune is super conservative but I'm out of fuel pump with any more boost.
Reply
Old Jun 24, 2013 | 11:28 PM
  #3  
Ferocity02's Avatar
TECH Senior Member
iTrader: (59)
 
Joined: Apr 2003
Posts: 9,447
Likes: 2
Default

Currently 9.5psi, ~13deg timing, 11 AFR, 91 octane and no meth. Going to water/meth soon.
Reply
Old Jun 24, 2013 | 11:36 PM
  #4  
AndysC3's Avatar
TECH Addict
iTrader: (14)
 
Joined: Jun 2009
Posts: 2,884
Likes: 10
From: Minot, ND
Default

I ran my 12.02 with 11psi, 20* and 91 and 3gal of e85 added to the tank and 100% meth
Reply
Old Jun 25, 2013 | 12:00 AM
  #5  
Blown06's Avatar
8 Second Truck Club
iTrader: (32)
 
Joined: Apr 2006
Posts: 5,662
Likes: 47
Default

I had this discussion with casey a lot back in the day......20/20 is the ****
Reply
Old Jun 25, 2013 | 12:55 AM
  #6  
ak2007r6's Avatar
TECH Veteran
iTrader: (1)
 
Joined: Aug 2011
Posts: 4,104
Likes: 0
From: Alaska
Default

To much / To Much / No Meth

Reply
Old Jun 25, 2013 | 01:46 AM
  #7  
gonzo 6.2's Avatar
TECH Veteran
iTrader: (8)
 
Joined: Oct 2002
Posts: 4,516
Likes: 15
From: oregon
Default

8lbs 16*
Reply
Old Jun 25, 2013 | 06:54 AM
  #8  
tim wellington's Avatar
TECH Enthusiast
10 Year Member
Liked
 
Joined: Apr 2013
Posts: 551
Likes: 1
From: eastern nc
Default psi and timing

running 8lbs 18.deg 10.8 a/f . dont know if its right .starting to buck like a bull under load over 4000rpm i was going start a post like this morning .any of yall had this problem it may be in tune tried air flow meter and aero 340
Reply
Old Jun 25, 2013 | 07:25 AM
  #9  
UnVmy5.3's Avatar
TECH Apprentice
 
Joined: May 2012
Posts: 375
Likes: 0
From: shelbyville tn
Default

10lbs 17 degrees no meth stock 5.3
Reply
Old Jun 25, 2013 | 07:45 AM
  #10  
sprayedenali's Avatar
TECH Fanatic
iTrader: (11)
 
Joined: Dec 2009
Posts: 1,573
Likes: 0
From: Birmingham, AL
Default

Originally Posted by ak2007r6
To much / To Much / No Meth

LOL!!

Like Travis said, 20/20 is where you all need to be! Haha. Don't be afraid to throw some timing at these things. Thats what knock sensors are for, right? Haha
Reply



All times are GMT -5. The time now is 04:27 AM.