charcold-bowtie

iTrader: (10)

lol. Gotta roll them ends


Mine is the same as most of the others, firewall

scooter k

iTrader: (22)

Did you screw it right to the firewall? I'm just worried about what is on the other side..

Daryn

iTrader: (19)

yeah its screwed to the firewall with some self tapping sheet metal bolts

2004SSS

iTrader: (25)

thanks for compliments guys , i really liked how that vic jr was setup it worked great with the n20 spray bars

should have done it in all black fittin's though. the one with the sheetmetal is how it looks now with a couple pumps on each bank. really want to setup a direct port on it soon for ***** and giggles . that should help get my 60'fts back along with a 2 step .

Swerve7rpm2000

iTrader: (9)

Where did you get that thing polished? and how much did it run ya....(The Victor)

2004SSS

iTrader: (25)

i had a local place do it that does all the manifolds for the locals' price was about 150-200 iirc. but they have done lots and lots of stuff for me (my entire banshee) all the vortech stuff and some of the TT stuff.

i have played with clear coating stuff after polish and had some sucess(my sheetmetal is clear coated) but some stuff just ends up a little dull. that vic was right after polish and needed some good cleaning the inside afterwards.

scooter k

iTrader: (22)

This is what I ended up doing.

02'Z71ONDUBZ'

iTrader: (8)

very clean install, and badass truck too btw man. did you fab the bracket yourself?

TIM Z

iTrader: (12)

That looks good bud.

You gonna run boost ref. around the master cyl. then to the manifold?

Its kinda hard to run stuff neat with 3 inlet/outlets the way they are on our regulators.

scooter k

iTrader: (22)

The black bracket off the master cylinder I did. the stainless one on the fuel pressure regulator came with it.