oil feed line?
#2
On The Tree
Join Date: Nov 2011
Location: Montgomery, Al
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
My kit came with a plate the bolts to the side of where the oil filter is on the engine... the plate was pre threaded for a fitting to connect the line to.
#3
TECH Senior Member
iTrader: (10)
Join Date: Oct 2004
Location: Crystal Springs, MS
Posts: 14,068
Likes: 0
Received 2 Likes
on
2 Posts
If you look above the oil filter, theres a oil port boss. its got 2 bolts holding it on.
Take that off and drill/tap it for 1/8" NPT and put a fitting in there to adapt it to -4AN. Vola theres your oil feed line.
No restrictor here.
Take that off and drill/tap it for 1/8" NPT and put a fitting in there to adapt it to -4AN. Vola theres your oil feed line.
No restrictor here.
Trending Topics
#9
TECH Enthusiast
iTrader: (8)
Join Date: Apr 2005
Location: springfield MO
Posts: 534
Likes: 0
Received 0 Likes
on
0 Posts
Mine is a little different since it is in a swap vehicle. I used the oil pressure gage port on top rear of the engine. I had already tapped the one above the oil filter for my gage. 4an no restrictor either.