Racinggeek

Does anyone have pictures of the Huron Speed cold side setup including the intercooler? I bought the entire V3 Turbo kit from Huron but am having trouble figuring out the cold side puzzle. Jon at Huron has been excellent help through email but I’m hoping someone out there has pictures of their whole setup. Any help would be greatly appreciated. My truck is a rcsb 2010 4x4 with the 5.3

Vance

Superman09

iTrader: (63)

Vance, I will get you some photos of it mocked up outside the truck to better show. I also emailed you some on-truck photos this morning. Thanks!

LHP02Silvy

Would anyone have any pictures of how low the crossover pipe sits on this kit I was interested in it and asked them about but they could not give me a straight answer, I remember seeing a picture of their older kit and it hung too low

Superman09

iTrader: (63)

I am working on getting you additional photos on a 99-02 truck to show you and will ASAP as mentioned in email. I do not have immediate access to the 2000 anymore, customer has the truck back. Nothing hangs below the crossmember on the 2012 here now.

Boost-freak

yup it's hard a little bit .. i used my old piping with huron speed 4" ic it's perfect