love my powerdyne
Jul 21, 2008 | 01:11 AM
#11
Staging Lane
Joined: Nov 2006
Posts: 61
Likes: 0
From: Minnesota
well the nmra vs nmca was rained out. well here is the list of stuff done to my truck. we will start from the motr back. flopw tech cermic headers no cats and dyno max bullit 3" dump, 02 z06 cam and springs soon to come summit racing roller rockers, poeted and polished tb. taylor wires tr55 pulgs, ls1 edit tuned by power house performance. phpinc.biz e fans. evans waterless coolant edlebrock water pump.and finaly power dyne with some 42# marine injectors with a msd boost a pump. which i dont like any one running a kb one let me know how you like it.. ok the trans is a nv 3500 with surge stage 2 cluth and upgraded slave cylinder and line and hurst pro compation full adjustable shifter. I highly recomend any one with stick to lay down the coin and get one. Drivle shaft is re balanced and up graded with spicer u joints. thanks Dan over at chicago drive line. The rear end is STOCK 3:43 with factory locker and to help controll every thing cal tracks traction bars. some bfg dr' on 16" Ulta rims with are pretty light they are the 50/50 series. and the whole tuck has all red line syntheic fluids. wow thats a lot of **** and almost every thing was bought used at swap meets or ebay. and i used to have a 125 shot nx set up with the carbon fiber solnoids which is going up for sale soone. so i will get some vid hopefully tuesday. at t&t. for who ever was wondering. so any q's let me knowi will answer them as much as i can.
Are you talking about the race at Joliet? If so I beg to differ on it being rained out. I have roughly 1500 pics and nice case of sunburn to prove that it wasn't. It may have been delayed a few hours but it deffinetly wasn't rained out.
Anyway it sounds great that your enjoying the powerdyne. Did you ever make down strip at all? I'd be intested to see your time slip. Were you by chance the maroon chevy that was in the true street class?
Not to flame too much but if this guys is hooking like this in the rain; I'd love too see what he could do hot sunny day . . .
Jul 21, 2008 | 11:50 AM
#12
Thread Starter
Teching In
Joined: Sep 2005
Posts: 19
Likes: 0
route 66 people are lazey
when i called the track they told me it was going to be resheduled because it was going to rain. i said are you sure and she got an attitude with me and sayed yes it was canceled i am pissed they told me it was rained out. I will be ther tuesday and if i get my m/t i will be there wed. If they still have slick wed night. Any ways was there good racing?
Jul 21, 2008 | 10:28 PM
#13
Staging Lane
Joined: Nov 2006
Posts: 61
Likes: 0
From: Minnesota
The racing was great! I made the trip from Minneapolis to Joliet because my girlfriend's cousin, Shawn Johnson, was racing + I just needed an excuse for a rode trip. It sucks that they told you that it was rained out. For a while there it did look like it was going to be but it eventually cleared up. When it did; it sure got humid fast! It would have been great to see your truck in action!
Jul 23, 2008 | 07:38 PM
#15
Teching In
Joined: Jun 2008
Posts: 42
Likes: 0
i've got a powerdyne just like his sittin in the garage collecting dust. i bought it to go on my truck then everyone scared me into not installing it cause my truck has 117,000 miles. i've also got a intercooler so i could intercool it but it's all collecting dust. do you guys think it would be safe on my motor at about 7 pounds of boost? let me know what you all think.
Jul 23, 2008 | 07:45 PM
#16
i've got a powerdyne just like his sittin in the garage collecting dust. i bought it to go on my truck then everyone scared me into not installing it cause my truck has 117,000 miles. i've also got a intercooler so i could intercool it but it's all collecting dust. do you guys think it would be safe on my motor at about 7 pounds of boost? let me know what you all think.
Thread
Thread Starter
Forum
Replies
Last Post
MA$TER_E
Tuning, Diagnostics, Electronics, and Wiring
5
Sep 9, 2015 03:14 PM
