I recently had to redo my motor so we went from the tvs 1900 on 243 heads to the 2300 on L92 heads. Manifold from Maggie has the injectors at an angle so we ordered the L92 fuel rails from GM but they run rail over the top of the maggie and are too short even with long injectors. Does anyone have a fuel rail that works with this system??? Maggie doesn't have one. This is the last piece to getting the engine up and running. We can fabricate but would prefer a manufactered unit. Thanks

 

You need to get an extended crossover tube. You need the square rails from GM, then get the extended crossover tube from Mag.

 

Thanks we have the rails unfortunately our sales rep at maggie appears confused when we told him about the fuel rail issue. I will call tomorrow and see if they have the extension in stock. After looking through the catalog, they dont have it as a specific part but I see several pictures of what we need.