easy 1psi of boost mod?
Nov 10, 2005 | 08:58 AM
#12
Thread Starter
Notorious BIG
iTrader: (6)
Joined: Aug 2005
Posts: 1,744
Likes: 0
From: Pittsburgh, PA
ordered the Airaid from summit, i'll have it tomorrow. just in time to go to the track on saturday. i'll post back with my numbers. i also ordered a 2.8" pulley from pulley boys, how much boost should i see with that pulley?
Nov 10, 2005 | 09:25 AM
#13
Originally Posted by Holty
ordered the Airaid from summit, i'll have it tomorrow. just in time to go to the track on saturday. i'll post back with my numbers. i also ordered a 2.8" pulley from pulley boys, how much boost should i see with that pulley?
CALM DOWN!!! Put the credit cards in a safe place,...... step away from the computer!!!
Nov 10, 2005 | 09:42 AM
#15
Originally Posted by Holty
ordered the Airaid from summit, i'll have it tomorrow. just in time to go to the track on saturday. i'll post back with my numbers. i also ordered a 2.8" pulley from pulley boys, how much boost should i see with that pulley?
Warranty is Void on the blower if you change the pulley(had to say it)
That being said, please be sure to use the proper tools to remove the nose pulley....and TQ to 45 ft pounds when you put the new one on!
Nov 10, 2005 | 09:52 AM
#17
Thread Starter
Notorious BIG
iTrader: (6)
Joined: Aug 2005
Posts: 1,744
Likes: 0
From: Pittsburgh, PA
Originally Posted by BlownChevy
Warranty is Void on the blower if you change the pulley(had to say it)
That being said, please be sure to use the proper tools to remove the nose pulley....and TQ to 45 ft pounds when you put the new one on!
That being said, please be sure to use the proper tools to remove the nose pulley....and TQ to 45 ft pounds when you put the new one on!
brian, thanks for the advice, and yes, i do understand my warranty will be voided.
what boost should i see with that pulley? will the blower run too hot with that small a pulley? keep in mind, i don't hammer on my truck very often, and very rarely am i running at full boost. i just want that extra power there for the occasional street race.
btw, having it tuned by pcm4less on wednesday next week. (in person)
Nov 10, 2005 | 10:00 AM
#18
Originally Posted by Holty
brian, thanks for the advice, and yes, i do understand my warranty will be voided.
what boost should i see with that pulley? will the blower run too hot with that small a pulley? keep in mind, i don't hammer on my truck very often, and very rarely am i running at full boost. i just want that extra power there for the occasional street race.
btw, having it tuned by pcm4less on wednesday next week. (in person)
what boost should i see with that pulley? will the blower run too hot with that small a pulley? keep in mind, i don't hammer on my truck very often, and very rarely am i running at full boost. i just want that extra power there for the occasional street race.
btw, having it tuned by pcm4less on wednesday next week. (in person)
you should see somewhere in the 9-10 psi range there.....you are not overspinning the blower at all, just make sure you have a GOOD IN PERSON TUNE.
**edit** Just noticed you said "in person" GOOD!
Nov 10, 2005 | 10:01 AM
#19
Thread Starter
Notorious BIG
iTrader: (6)
Joined: Aug 2005
Posts: 1,744
Likes: 0
From: Pittsburgh, PA
Originally Posted by wkdivr
CALM DOWN!!! Put the credit cards in a safe place,...... step away from the computer!!!
also, forgot to mention that i ordered a Transgo HD2 shift kit, zinc plate, and billet servos from JAG yesterday LOL
Nov 10, 2005 | 10:02 AM
#20
Originally Posted by Holty
also, forgot to mention that i ordered a Transgo HD2 shift kit, zinc plate, and billet servos from JAG yesterday LOL
dude, i thought i was bad! put the credit card DOWN!
