trying to order one most likely off EBAY but not sure what one to get or were to mount it...

pics would be NICE

 

Not fancy, but it functions.
It is from catchcans.com

 

Got that same one ^

Will be installing next week. I'll post pics

 

the brand isn't as important as how they seperate the oil. There are many high quality pcs out there.....and alot of crap too.

 

I installed the RX(RevXtreme) on my brothers 2010 Camaro and have one ready to go for the Silverado. The guy who sells them is on the sister site LS1tech and knows almost everything there is to know about catch cans.

 

I have the same one as above, except on the little bracket by the alternator above the power steering pump

 

I just got two from catchcans.com. Very nice units. I had an ebay can before and it didnt do anything.

 

Here is a pic on the Camaro. You can see the can behind the nitrous dedicated fuel tank. The lines hit the engine cover so it would not sit flush so we moved it to the other side.

After it was moved to the drivers side by the CAI.



The one for the Silvy is still in the box behind me waiting to be installed. Also, when we removed the intake to install a ported one it was bathed in oil but now that the can is installed it is dry.

 

I've been wondering. Is that a Stock Catch can next to your catch can or what? IF so then Why add another?

 

If you have questions about which cans are good I can give you the contact info of the guy I got mine from. He will answer any questions regardless of what can you have. He will tell you which cans are better than his and which ones are not. He has a couple of goo post on LS1 about the proper way to route them for NA, Turbo, Centri, Roots etc.