Belt ?
Aug 3, 2019 | 10:20 AM
#2
Staging Lane
Joined: Oct 2017
Posts: 82
Likes: 12
From: Southern CA
Are you looking for 116" effective length or outside circumference? The K061145 has an effective length of 114.65" and an outside circumference of 115.22"
I think you want to find a 115.65" effective length or 116.22" outside circumference. I shop by looking at the effective length.
But yeah, looking at the Gates website, your out of luck because the next lengths after your 114.65" are:
K061177HD 117.72" effective length
K061187HD 118.74" effective length
Might have to try the 117.72" and see if it slips. How are you putting your belt on over the pulleys and tensioner by the way? Sometimes people think they need a longer belt because they're trying the slip the final loop over the top ribbed pulley. I slip my last loop on over a smooth idler and can fit a much tighter belt this way. Give that a try with your current K061145 belt.
I think you want to find a 115.65" effective length or 116.22" outside circumference. I shop by looking at the effective length.
But yeah, looking at the Gates website, your out of luck because the next lengths after your 114.65" are:
K061177HD 117.72" effective length
K061187HD 118.74" effective length
Might have to try the 117.72" and see if it slips. How are you putting your belt on over the pulleys and tensioner by the way? Sometimes people think they need a longer belt because they're trying the slip the final loop over the top ribbed pulley. I slip my last loop on over a smooth idler and can fit a much tighter belt this way. Give that a try with your current K061145 belt.
Aug 3, 2019 | 03:27 PM
#3
Thread Starter
Staging Lane
Joined: Dec 2018
Posts: 67
Likes: 5
From: Florida
My builder asked for me to check around for a longer belt. Its for a Vortech kit on a 5.3, he has changed a few things to get it to work better. The manual tensioner wasnt cutting it so he added a auto tensioner from a 98 Camero which is working great but the belt is very tight. Also had a custom pulley with a lip made to make sure the belt doesnt walk off.
Ill ask him about the length and get back with you.
Its been a 7 month project that was supposed to be 2 months
Thanks for the response.
Ill ask him about the length and get back with you.
Its been a 7 month project that was supposed to be 2 months
Thanks for the response.
Aug 3, 2019 | 03:45 PM
#4
Thread Starter
Staging Lane
Joined: Dec 2018
Posts: 67
Likes: 5
From: Florida
Are you looking for 116" effective length or outside circumference? The K061145 has an effective length of 114.65" and an outside circumference of 115.22"
I think you want to find a 115.65" effective length or 116.22" outside circumference. I shop by looking at the effective length.
But yeah, looking at the Gates website, your out of luck because the next lengths after your 114.65" are:
K061177HD 117.72" effective length
K061187HD 118.74" effective length
Might have to try the 117.72" and see if it slips. How are you putting your belt on over the pulleys and tensioner by the way? Sometimes people think they need a longer belt because they're trying the slip the final loop over the top ribbed pulley. I slip my last loop on over a smooth idler and can fit a much tighter belt this way. Give that a try with your current K061145 belt.
I think you want to find a 115.65" effective length or 116.22" outside circumference. I shop by looking at the effective length.
But yeah, looking at the Gates website, your out of luck because the next lengths after your 114.65" are:
K061177HD 117.72" effective length
K061187HD 118.74" effective length
Might have to try the 117.72" and see if it slips. How are you putting your belt on over the pulleys and tensioner by the way? Sometimes people think they need a longer belt because they're trying the slip the final loop over the top ribbed pulley. I slip my last loop on over a smooth idler and can fit a much tighter belt this way. Give that a try with your current K061145 belt.
Aug 3, 2019 | 04:14 PM
#5
Staging Lane
Joined: Oct 2017
Posts: 82
Likes: 12
From: Southern CA
Looks like you'll just have to get a smaller pulley to make the current 114.65" belt work! Enjoy the added boost 
Here's a thread where someone was having the same problem. Suggestions were to change the idler size or cut an 8 rib down to 6 (sounds sketchy to me).
https://forums.corral.net/forums/sup...where-buy.html
Here's a thread where someone was having the same problem. Suggestions were to change the idler size or cut an 8 rib down to 6 (sounds sketchy to me).
https://forums.corral.net/forums/sup...where-buy.html
Thread
Thread Starter
Forum
Replies
Last Post
thunderwagen
GM Engine & Exhaust Performance
4
Aug 7, 2005 09:33 AM
thunderwagen
GM Engine & Exhaust Performance
1
Aug 6, 2005 07:29 AM
really slow truck
GM Engine & Exhaust Performance
4
Mar 19, 2002 08:48 PM
