I just had LEP build me a forged 365 with a set of WCCH 243's and a LEP Stage 1 Maggie cam and it put down 611hp/591tq @ 10 psi with 4500 DA in Las Vegas air on a break in tune. It should make 2 more psi back home at sea level and as much as 8-10% more power once broken in. It should put down a nice number at the track once she's dialed in.

BIG Thanks to LEP for building this nice motor and hooking me up with a blower cam, WCCH for their excellent work on the heads and Joe (LeftCoast32) for doing the dyno tune.

 

Damn brotha! great numbers! congrats! It actually gives me a pretty decent idea of what I'm putting down as I have a 365, WCCH Heads, Healthy Cam running 11lbs of boost (in other words/very similar to your setup)

what are the specs on your cam?

 

WOW! That thing is going to rip! Congrats on the new setup and numbers.

 

Nice numbers, it should run strong!

If they already have it in the chassis, why didn't they dial it in for you?

 

That's pretty damn impressive. How fast are you spinning the blower? Assuming TVS1900? I have a similar setup with TVS2300 and 3.1" pulley. My numbers aren't near that good on 11psi.

 

I would imagine he means getting to hook at the track. Might be a challange with that kinda power...

 

Real nice tim now 10s.around the.corner

 

Ah, makes sense!

 

very nice numbers tim

 

Yes, 1900, IW 10% overdriven balancer with a 2.7 blower pulley.

Im changing stalls from a 3000 to a 3200, might try out a different drag setup, and gonna make a few small suspension changes. Im looking to knock off .1 on my 60'