after searching for what seemed to be forever, i finally found a dyno place close to grand forks. i would like to compare this guys prices with you all. he wants $75 for one pull which will only show hp and torque, during that pull, he wants $25 more if you want air/fuel, any pull after that is $25. does these prices seem good? when i was in England it was only 45 pounds for 3 pulls and you got the works, 45 lbs is $ equivalant of like $80. i would like to do the dyno after each upgrade, but this guy would eat all my power money. any other suggestions would be great. thanks

 

Here it's $75 for 2 pulls with air/fuel and California is usually on the expensive side. I've seen the mobile dynos at tracks do 2 pulls for $50. Yeah, I think that guy is a little on the high side.

 

Ya around here you can get 3 pulls with wideband for 50 or 55 dollars

 

Here in E. Tn. it is $65.00 for three pulls or $100 for up to five pulls with O2 sensor.

 

In GA and FL, its roughly $75 for 3 pulls with AFR but some are more and less than others but that's about the average.

 

I found a shop in Longmont CO that has a dyno day the first Sat of every month. $45 gets you 3 pulls w/O2's. Or he told me I can come on a regular day and I counld get an hour with him helping me tune for $125.