Last night I went to the track and only got 1 run in... I got there at 8 o'clock and was there till 11.. I got one run in and I pulled a 15.211@89.02.. WTF?
R/T .479
60' 2.325
330 6.401
1/8 9.771
mph 73.13
1000 12.683
1/4 15.211
mph 89.02

My truck is faster than this.. At least high 14... What the hell? My 60 around avrage.. I spin a little off the line.. Usually I manual shift it but left it in drive this time.. Probably would have been faster... I would get better E/T's with 3:73's.. So which brings me to... What would be a good mid to high range cam to use with a 2800 stall? I dont care about gas milage... And anyone have a good cam and springs for sale?

 

I'll have a Comp 216/220 forsale next week. I have springs also,but I am trying to sell them on a set of heads. I'll have 1.8 Harland Sharp rockers forsale also.

 

how much and what is the lift on the cam?

 

with a 2800 stall I would get a TR220 with some 918 springs and hardened pushrods...

 

Is your truck a regular cab or extended cab? I assume you have a 4.8 from looking at your name. Your times are actually good if you have a 4.8 extended cab truck with the mods you listed. Either way, a stall will get you in the 14's.

 

Tr220? I wonder who has a tr220 and 918 for sale...

 

Its a single cab.. It pisses me off cause I could pull 14's all day with my 3:73's.. But my 60 foot is way better...

 

But then again it probably would have been faster if I manual shifted..

 

Comp 216/220, 525/532 on a 114 lsa. $ 200 plus shipping

 

How much for springs, if you decide to sell em? Also what about the rockers?