SOOOOO close, but not quite there.
May 10, 2010 | 06:06 PM
#23
Thread Starter
Joined: Nov 2009
Posts: 1,102
Likes: 1
From: Central NJ
Itching for finals to be over, so I can get my damn exhaust worked out, and hopefully see a 13.xx timeslip. I'll be perfectly happy for quite a while being able to say that my fat *** 4x4 (that looks pretty much stock, both on the outside, and in the engine bay) runs in the 13s. 
May 10, 2010 | 07:09 PM
#24
BTW, with the stock heads on my truck and a horrible pinion angle, I was able to hook in 2wd pretty good. My best was 14.05 with a little spin off the line on bald 35's aired down slightly.
May 10, 2010 | 07:31 PM
#25
Thread Starter
Joined: Nov 2009
Posts: 1,102
Likes: 1
From: Central NJ
That's what I said with my truck. Now that I'm used to it, it feels like a mid 14 truck again. It's a disease!
BTW, with the stock heads on my truck and a horrible pinion angle, I was able to hook in 2wd pretty good. My best was 14.05 with a little spin off the line on bald 35's aired down slightly.
BTW, with the stock heads on my truck and a horrible pinion angle, I was able to hook in 2wd pretty good. My best was 14.05 with a little spin off the line on bald 35's aired down slightly.
And yeah, next time I go I'm going to experiment with some 2wd runs. I'm not sure if you've got the G80 or not, but I've just got the open rear, so I really doubt I'm going to even come close to hooking on these tires, but we'll see. Mainly, I want to see how it affects my MPH.
This is the fun part though. I know it's running right (so I can stop being paranoid), now it's just a matter of fine-tuning and experimenting with what works the best.
May 10, 2010 | 11:02 PM
#26
Haha, one-legger, that sucks. I blew up my first G80, then got a Jasper rear with a Zexel(similar design to trutrac), blew that one up and got it replaced under warranty. I'm going to change it out to a 14 bolt with trutrac before I blow it up again though.
High 17's!!! My truck ran a 15.9 bone stock with a catback and cone filter, lol.
High 17's!!! My truck ran a 15.9 bone stock with a catback and cone filter, lol.
May 10, 2010 | 11:25 PM
#27
Thread Starter
Joined: Nov 2009
Posts: 1,102
Likes: 1
From: Central NJ
Haha, one-legger, that sucks. I blew up my first G80, then got a Jasper rear with a Zexel(similar design to trutrac), blew that one up and got it replaced under warranty. I'm going to change it out to a 14 bolt with trutrac before I blow it up again though.
High 17's!!! My truck ran a 15.9 bone stock with a catback and cone filter, lol.
High 17's!!! My truck ran a 15.9 bone stock with a catback and cone filter, lol.
Granted, It was on a 190k 4.8, at full weight, in 90* weather, with a MAF reading 20% low, but still. It was slow as fawk.
May 11, 2010 | 07:30 AM
#29
That's what I said with my truck. Now that I'm used to it, it feels like a mid 14 truck again. It's a disease!
BTW, with the stock heads on my truck and a horrible pinion angle, I was able to hook in 2wd pretty good. My best was 14.05 with a little spin off the line on bald 35's aired down slightly.
BTW, with the stock heads on my truck and a horrible pinion angle, I was able to hook in 2wd pretty good. My best was 14.05 with a little spin off the line on bald 35's aired down slightly.
May 11, 2010 | 10:51 AM
#30
Thread Starter
Joined: Nov 2009
Posts: 1,102
Likes: 1
From: Central NJ
4.56s with 35s is going to be just about the same final drive ratio as m 3.73s/265s.
Thread
Thread Starter
Forum
Replies
Last Post
BROKE-aSS-BLAZER
GM Parts Classifieds
7
Oct 13, 2017 03:50 PM
