Reached my Goal!
#1
Thread Starter
9 Second Truck Club
iTrader: (11)
Joined: Sep 2005
Posts: 2,442
Likes: 1
From: Odessa Texas
I recieved my et streets yesterday and headed straight to the track after work. All passes were on a 100 shot and are as follows.
1st pass
60 ft= 2.20
330 ft= 5.88
1/8 mile= 8.93 @ 80.23
2nd pass
60 ft= 2.15
330 ft= 5.77
1/8 mile= 8.78 @ 81.33
3rd pass
60 ft= 2.07
330 ft= 5.68
1/8 mile= 8.69 @ 81.27
best pass
60ft= 2.06
330ft= 5.66
1/8 mile= 8.66 @ 81.24
My best kills were a 13 sec lightning and a new dodge srt 10 QC. Damn that felt good!
In two weeks Im going to a 1/4 mile track, taking off my front 20's, tailgate, speakers and hitch to see if I can get a very low 13. Any suggestions on one more mod that can possibly get me to the 12's in the quater besides a bigger nitrous shot.
1st pass
60 ft= 2.20
330 ft= 5.88
1/8 mile= 8.93 @ 80.23
2nd pass
60 ft= 2.15
330 ft= 5.77
1/8 mile= 8.78 @ 81.33
3rd pass
60 ft= 2.07
330 ft= 5.68
1/8 mile= 8.69 @ 81.27
best pass
60ft= 2.06
330ft= 5.66
1/8 mile= 8.66 @ 81.24
My best kills were a 13 sec lightning and a new dodge srt 10 QC. Damn that felt good!
In two weeks Im going to a 1/4 mile track, taking off my front 20's, tailgate, speakers and hitch to see if I can get a very low 13. Any suggestions on one more mod that can possibly get me to the 12's in the quater besides a bigger nitrous shot.
#3
Your mph seems low. In my truck without a cam but otherwise same mods as on 100shot running in 4wd I would run consistant 9 flats at 84+. You should have 50ish more hp than my old setup not to mention me being heavier and in 4wd.
#6
Thread Starter
9 Second Truck Club
iTrader: (11)
Joined: Sep 2005
Posts: 2,442
Likes: 1
From: Odessa Texas
Compared to not having et streets it feels like it pulls about twice as hard. I usually race with one hand but used two for safety with the slicks. I was worried cause I'm not using tubes in them. Is anyone gonna tell me a mod that might get me a 12.9999?
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
pewter00
GMT 800 & Older GM General Discussion
11
Oct 20, 2023 05:40 AM
Vortec350ss
Drag Racing
134
Jan 12, 2016 10:36 PM




