Well I made an other attempt at the 10.99, but came short again. This is turning into up hill climb! Made couple more 11.3's, then a NPB of 11.22 with a 1.61 60 off a 3700 2-step.

I've found a few issues with the truck I can take care of. I'm raising the boost but not making any more HP. First thing i'm thinking is maybe my ls6 springs are to weak for 15+psi. Also found my Jegs brand cutout, (second one i've had problems with) is nearly completely closed after a pass. My exhaust after the cutout is horrible. Goes into another muffler and runs thru 2.5inch, press-bent piping.

I'll keep @ it though.

http://www.youtube.com/watch?v=aSKJSHVN-rw&hd=1

 

good luck on that 10.99, dont give up....

 

Get you some dual springs and you will really be able to use that power

 

Congrats on the new PB. Maybe a little weight reduction would help (tail gate)..that 4.8 is haulin ***!!

 

Thanks guys. I actually just put that back on there. I decided I want the 10 with a full truck intact, just need mo powa!

I also added another Vette I beat up on other then the c6 z06. That last run was a c5 z06 with atleast an exhuast. I even gave him about a 1 second head start.

 

nice run man maybe a smaller front tire combo?

 

brakes are probally too big

congrats on the new PB why not buy some stock 317's since your gonna replace the springs?

 

foose, youre not letting up are you lol!!

be patient man, it'll happen


another great run !

 

How much boost are you building before you launch?

 

Nobody likes a quitter Skeet....

Quick, last run with a 1.61 I left with 9psi at 3700