A new time for teh good ol farm truck
#1
I havent been to the track in over a year... or when I got my 20's and rebuilt tranny, tb tc... got 16.2s etc... 3.0 60fts
Best time all and all ever before last night was a 15.9 @ 87.xx mph on my old set up (nelson tune, flowmaster delta 50, 8.5 wires, ls1 fans, nelson harness, ebay intake, tb spacer, 33 a/ts, and some tranny mods)
Current mods: Magnaflow muffler 3'' in 3'' out, magnaflow high-flow cats upgraded piping size as well, built tranny, tb tc, brute force intake, 8.5 wires, asp pulleys, ls1 fans, nelson harness, and alot of weight reduction...
Well as of last night I broke a new record for the truck... 1st run I had a crap load of wheel hop. Sounded almost like I broke the output shaft again... Let off on the gas then gased it again then took off rather nicely...
reved to about 1500rpms
1st run
Reaction: .8144
60 FT: 2.5075
330 FT: 6.7457
1/8 ET: 10. 2326
1/8 MPH: 70.97
1000 ET: 13.2001
1000 MPH: none
1/4 ET: 15.7289
1/4 MPH: 88.46
2nd run
Ran a 2007 gmc denali nnbs he had 24's or 26's... He said he ran a 15.7 his 1st run... Well he wanted to put 20 dollars on the line but ya... I knew better then that... SO I THOUGHT... he did a 15.7 AGAIN
Launched it 4hi this time waited till it shifted then threw it back into 2wd. reved to about 1800ish rpms
well lets just say much better time this time...
Reaction: .8965
60 FT: 2.3273
330 FT: 6.5394
1/8 ET: 10.0234
1/8 MPH: 70.97
1000 ET: 12.9928
1000 MPH: none
1/4 ET: 15.5153
1/4 MPH: 88.67
3rd run
Launched in 4hi again... this was a fast light so ya... but another decent lower number... reved again to about 1800ish rpms
Reaction: 1.3180
60 FT: 2.3069
330 FT: 6.5123
1/8 ET: 9.9928
1/8 MPH: 71.05
1000 ET: 12.9602
1000 MPH: none
1/4 ET: 15.4830
1/4 MPH: 88.62
4th run
best run... wanted to run again cause i know if i pushed it a lil harder i could have done better...
launched in 4hi again as well, got it reved up to about 2k rpms
Reaction: .8140
60 FT: 2.2894
330 FT: 6.4970
1/8 ET: 9.9712
1/8 MPH: 71.17
1000 ET: 12.9342
1000 MPH: none
1/4 ET: 15.4545
1/4 MPH: 88.74
I have a cam on order/bidding on currently... Hope to get it with some LT's and get a nice 3k stall, and some 4.10's... before end of summer...
Comp Cam XR265HR: 265 271 212 218 .558 .563 115°
Best time all and all ever before last night was a 15.9 @ 87.xx mph on my old set up (nelson tune, flowmaster delta 50, 8.5 wires, ls1 fans, nelson harness, ebay intake, tb spacer, 33 a/ts, and some tranny mods)
Current mods: Magnaflow muffler 3'' in 3'' out, magnaflow high-flow cats upgraded piping size as well, built tranny, tb tc, brute force intake, 8.5 wires, asp pulleys, ls1 fans, nelson harness, and alot of weight reduction...
Well as of last night I broke a new record for the truck... 1st run I had a crap load of wheel hop. Sounded almost like I broke the output shaft again... Let off on the gas then gased it again then took off rather nicely...

reved to about 1500rpms
1st run
Reaction: .8144
60 FT: 2.5075
330 FT: 6.7457
1/8 ET: 10. 2326
1/8 MPH: 70.97
1000 ET: 13.2001
1000 MPH: none
1/4 ET: 15.7289
1/4 MPH: 88.46
2nd run
Ran a 2007 gmc denali nnbs he had 24's or 26's... He said he ran a 15.7 his 1st run... Well he wanted to put 20 dollars on the line but ya... I knew better then that... SO I THOUGHT... he did a 15.7 AGAIN
Launched it 4hi this time waited till it shifted then threw it back into 2wd. reved to about 1800ish rpms
well lets just say much better time this time...
Reaction: .8965
60 FT: 2.3273
330 FT: 6.5394
1/8 ET: 10.0234
1/8 MPH: 70.97
1000 ET: 12.9928
1000 MPH: none
1/4 ET: 15.5153
1/4 MPH: 88.67
3rd run
Launched in 4hi again... this was a fast light so ya... but another decent lower number... reved again to about 1800ish rpms
Reaction: 1.3180
60 FT: 2.3069
330 FT: 6.5123
1/8 ET: 9.9928
1/8 MPH: 71.05
1000 ET: 12.9602
1000 MPH: none
1/4 ET: 15.4830
1/4 MPH: 88.62
4th run
best run... wanted to run again cause i know if i pushed it a lil harder i could have done better...
launched in 4hi again as well, got it reved up to about 2k rpmsReaction: .8140
60 FT: 2.2894
330 FT: 6.4970
1/8 ET: 9.9712
1/8 MPH: 71.17
1000 ET: 12.9342
1000 MPH: none
1/4 ET: 15.4545
1/4 MPH: 88.74
I have a cam on order/bidding on currently... Hope to get it with some LT's and get a nice 3k stall, and some 4.10's... before end of summer...
Comp Cam XR265HR: 265 271 212 218 .558 .563 115°
Thread
Thread Starter
Forum
Replies
Last Post
ARC
GMT 800 & Older GM General Discussion
57
Feb 21, 2022 10:54 AM
SLOPONY
GMT 800 & Older GM General Discussion
20
Oct 18, 2016 06:05 AM



