Drag Racing Fastest Truck List inside, sortable for any make/model/engine listed.
TIME SLIP DATABASE

New PB last nite at SGMP

Old Sep 18, 2011 | 07:28 PM
  #1  
svtlightning02's Avatar
Thread Starter
On The Tree
 
Joined: Jul 2010
Posts: 147
Likes: 0
From: Waycross, Georgia
Default New PB last nite at SGMP

Well not a 10sec slip like i hoped for but did good. Went to the track with coulple buddys and there built mustangs. I tryed out the new bogarts with the 315/60/15 MT et street radials and on first pass street tune cut my best ever 60ft of a 1.60. I loaded race tune and changed out upper pulley, iced the IC and the spinning started. 1st pass spun to a 1.85 60ft and second to a 1.79 60ft. before the nite was over we changed out the bogarts back to my AR bajas and 28" slicks. truck spun some but not as bad and got the best pass of the nite. My mph was off by 2mph all nite long. then temps never dropped like i wanted it to. at midnite when we left it was still around 75* and high humidity. I need to do some dattalogging for Jim sr. to look at and make some changes to the race tune. A/F was around 10.9-11.1 at WOT. Truck also Mph same with 28" tires as 30" tires. gonna order some QA1s in the very near future. Its a work in progress lol
both tunes in the truck are email tunes, but i have put truck on the dyno for baseline numbers.

Reply
Old Sep 18, 2011 | 07:35 PM
  #2  
skeet's Avatar
TECH Junkie
iTrader: (18)
 
Joined: Feb 2007
Posts: 3,157
Likes: 2
From: P.A. TX
Default

its oh so close man, youre almost there, congrats on your PB
Reply
Old Sep 18, 2011 | 07:48 PM
  #3  
tarinitup's Avatar
9 Second Truck Club
iTrader: (11)
 
Joined: Sep 2005
Posts: 2,442
Likes: 1
From: Odessa Texas
Default

Sucks to be that close. You'll get there.
Reply
Old Sep 18, 2011 | 08:18 PM
  #4  
svtlightning02's Avatar
Thread Starter
On The Tree
 
Joined: Jul 2010
Posts: 147
Likes: 0
From: Waycross, Georgia
Default

yea so close. i have stock suspension so that killing the 60fts. it will get better as the temps get lower. last nite it was 75* but had high humidity.

tarinitup you have a sharp *** truck. i watched the vids
Reply
Old Sep 19, 2011 | 01:41 AM
  #5  
stock48's Avatar
9 Second Truck Club
iTrader: (16)
 
Joined: Sep 2006
Posts: 3,655
Likes: 5
From: Colorado Springs, Co/ Central, Ca
Default

Nice runs! So close
Reply
Old Sep 19, 2011 | 06:26 AM
  #6  
gnd111's Avatar
Launching!
iTrader: (1)
 
Joined: Dec 2005
Posts: 289
Likes: 0
From: Orange Park, FL
Default

Nice. I have always like running at SGMP.
Reply
Old Sep 19, 2011 | 10:04 AM
  #7  
BigKID's Avatar
TECH Veteran
20 Year Member
Liked
iTrader: (5)
 
Joined: Dec 2001
Posts: 4,947
Likes: 242
From: Panama City, Fl
Default

Your mph is very consistent. Work on that 60' and you'll be there.
Reply
Old Sep 19, 2011 | 10:09 AM
  #8  
slowec's Avatar
TECH Junkie
iTrader: (9)
 
Joined: Jun 2004
Posts: 3,062
Likes: 0
From: Brunswick, Ga
Default

Great runs!
Don't you have long bars?
Interesting that old 28" slicks/cheap wheels were better than Bogarts/M/T's !!!
Reply
Old Sep 19, 2011 | 11:05 AM
  #9  
svtlightning02's Avatar
Thread Starter
On The Tree
 
Joined: Jul 2010
Posts: 147
Likes: 0
From: Waycross, Georgia
Default

Originally Posted by slowec
Great runs!
Don't you have long bars?
Interesting that old 28" slicks/cheap wheels were better than Bogarts/M/T's !!!
yea i have JLP long bars but they only do so much. i need the weight to transfer to the rear.
Reply
Old Sep 19, 2011 | 11:24 AM
  #10  
tiffo60's Avatar
TECH Fanatic
iTrader: (2)
 
Joined: Aug 2006
Posts: 1,183
Likes: 1
From: Fort Worth
Default

Whats the Stall on the converter your running? What RPM are you leaving the line at?

I had a 2600 in mine and it seemed to do the best launching @1000rpm
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:26 AM.