First Turbo 5.3l Pass
May 10, 2016 | 07:47 PM
#1
Thread Starter
Registered User
Joined: May 2016
Posts: 5
Likes: 0
First Turbo 5.3l Pass
I finally made my first pass at the strip with my On3 Turbo setup.
Link to the pass:
As it sits now its their 76mm Turbo on a 100% stock RCSB 5.3 (even stock valve springs). The only other mod was a 2" shackle drop.
The stock 17" 245 all seasons and stall were killing me. Launching at anything over idle just spun or wheelhopped.
Edit: 1/8 mile mph was messed up for the lane but on other runs it was trapping 88-89mph
Link to the pass:
As it sits now its their 76mm Turbo on a 100% stock RCSB 5.3 (even stock valve springs). The only other mod was a 2" shackle drop.
The stock 17" 245 all seasons and stall were killing me. Launching at anything over idle just spun or wheelhopped.
Edit: 1/8 mile mph was messed up for the lane but on other runs it was trapping 88-89mph
Last edited by defconfire; May 10, 2016 at 10:58 PM.
May 10, 2016 | 08:25 PM
#6
Thread Starter
Registered User
Joined: May 2016
Posts: 5
Likes: 0
