Ive been tuning it, tried everything from shift times to adding torque management on the shifts with no luck. It has seemed to get a lot worse with the added power (boost increase) i put a post in the tuning section describing it just to make sure ive covered all the bases. Pretty sure its 80e time!

 

What is the shift command rpm at

 

Right now its at 5900. We've had it as low as 5000 also, it commands the shift it just free revs when it does

 

The trans is doing something then. Is the trans built?

my shift is set to 4400 rpm

 

I've thought about lowering down to 4-4500 just for the hell of it to see what happens. The trans builder thinks the 3-4 band maybe starting to wear. It is built

 

Lower it down and see if it works. The more power, the lower the shift needed.

 

What kind of shift times you running?

 

It's weird, because once it shifts, it holds the power fine.

 

Keep your shift times above .250

 

Congrats on the run. I can't wait to see how she does when all the kinks are fixed!! I hope mines runs as well as yours when it finished.