I have had Zero luck with getting my truck to .60 foot out of the gates local.. made a road trip about 45min last night.... still 90outside and The air for everyone sucks... Track was redneck/backwoods Prairie Hill Dragway outside of waco texas....... .60 1.76 6.98@103.9 10.87@123 I am done messing with the DOT stuff... I didnt get a timeslip for my best passes.. but i can back this up.... The ole Rear mount turbo has plenty of steam to go ! Just sucks its summer

 

Getting there for sure man! It was hot as hell on Sat! Maybe this weekend it will be a little cooler and you will be able to run the truck all out

 

Very nice! Is this the guy who bought Cody's old motor?

 

yes it is Jordan

gounds like you got her starting to leave now finally... get some real stickys on it and leae with some 1.5's and watch the e/t fall

 

Well damn, good **** for a piston slapping, oil burning mess then!

 

lol.

Nice times

 

Good deal Casey whats the plan to get it down lower now?

 

Codys "****" was sent to WCCH where it was rebuilt with new crank,pistons,rods,bearings,camshaft The motor was sent to me on a pallet by WCCH who have been the best People on this site to deal with and i call them weekly over a year later !!! .. The motor is top notch in every way !! 65psi at idle Zero lifter or piston noise and never used a drop of oil But thanks for the Comments and Stay Tuned ...

 

The air was BAD !! almost 3800 foot on the weather station ... the truck went to high gear and was dead horse .. There is alot more out there when i have been 108+ already in the 1/8 and alot faster in thr .60 foot with Slicks but the drag radials have taken me weeks to figure out .. Truck is just starting to get fun to drive in the cooler weather i have been 11 flat @ 92 ... This is the 4th weekend in a row i been out racing and made 11 passes this weekend on bolth friday and Sat and only tool i use on the truck is the tire guage

 

I was making light of Cody's early troubles man, I knew it had been re-done.