backed up the 11's again this weekend...
#1
Thread Starter
11 Second Truck Club
iTrader: (37)
Joined: Mar 2006
Posts: 2,867
Likes: 2
From: Dallas, Georgia
weather was HOT!
DA sucked!
But...
I've been fighting some fuel issues the last few times out and finally solved them (drum of fuel had crap in it that was clogging my in-tank sock)
Saturday was the hottest and everyone was way off on ET and MPH...
I ran a 12.162 @ 112.92 (TCC locking on 1-2 and 2-3)
Sunday was a little better, but still hot as hell!
I ran three new best MPH and came within 1/100 of my best ET...
so...all things considered, I was happy...we figure an EASY 2-3 tenths off of what results w/ good air would've been...
(no TCC lock)
11.965 @ 115.57
11.954 @ 114.81
11.969 @ 114.77
video w/ a few of my runs...some of you may recognize cablebandit and sslow4.8 as well...
**VERY large HD file**
"save file as" is best if you have slow connection
http://mssftw.com/videos/SD-MCE-Spring-09-Sunday.wmv
DA sucked!
But...
I've been fighting some fuel issues the last few times out and finally solved them (drum of fuel had crap in it that was clogging my in-tank sock)
Saturday was the hottest and everyone was way off on ET and MPH...
I ran a 12.162 @ 112.92 (TCC locking on 1-2 and 2-3)
Sunday was a little better, but still hot as hell!
I ran three new best MPH and came within 1/100 of my best ET...
so...all things considered, I was happy...we figure an EASY 2-3 tenths off of what results w/ good air would've been...
(no TCC lock)
11.965 @ 115.57
11.954 @ 114.81
11.969 @ 114.77
video w/ a few of my runs...some of you may recognize cablebandit and sslow4.8 as well...
**VERY large HD file**
"save file as" is best if you have slow connection
http://mssftw.com/videos/SD-MCE-Spring-09-Sunday.wmv
Last edited by Superado; Apr 28, 2009 at 11:09 PM.
#3
Thread Starter
11 Second Truck Club
iTrader: (37)
Joined: Mar 2006
Posts: 2,867
Likes: 2
From: Dallas, Georgia
maxed @ 10 #'s (+/-) w/ the 4.0" pulley that I'm still running.
now that alot of little issues have been resolved, I'm ready to go a little smaller on the pulley...trying to buy a 3.70"...I have a 3.40" but I wanna ease into it...the P1SC let go on the first pass w/ that same pulley...
now that alot of little issues have been resolved, I'm ready to go a little smaller on the pulley...trying to buy a 3.70"...I have a 3.40" but I wanna ease into it...the P1SC let go on the first pass w/ that same pulley...
#5
Thread Starter
11 Second Truck Club
iTrader: (37)
Joined: Mar 2006
Posts: 2,867
Likes: 2
From: Dallas, Georgia
it took a dump on the first pass w/ the new motor and 3.40" pulley last year...combined w/ the water pump pulley getting snatched off...
thus, the D1SC and welded on wp pulley I have now...
thus, the D1SC and welded on wp pulley I have now...
Last edited by Superado; Apr 27, 2009 at 02:01 PM.
Trending Topics
#10



