2000 trans am formula 7k
#1
Thread Starter
Formerly darynC-10/23/10
iTrader: (19)
Joined: Aug 2006
Posts: 2,300
Likes: 1
From: gonzales louisiana
i have a 2000 trans am formula 6 speed i want to sell ,
heres the break down of everything it has
130k- .Chameleon green ( changes color in sunlight).no t tops clean cloth seats , no rips runs a 12.20 @ 110 on street tires
interior 8/10 (no rips or tears on seats!)
exterior7/10 paint is spidered on the front bumber ( barely notice it)... someone backed in to the back bumber and spidered the paint also, and there is a dime size chip next to the gas filler door
Motor runs very strong,
224/230 . 575 lift .114 lsa cam from synergy motorsports,
dual valve springs,
hardened pushrods,
Svo 30# injectors,
LS6 intake
ported throttle body,
Slp Lid
Lpp ceramic coated long tube headers
Ceramic coated V band Y pipe with 2 sets of cats and test pipes
Hooker aerochamber exhuast
Trans-
t56
hurst shirter with short stick
Ls6 clutch (25k)
PST carbon fiber driveshaft with forged yoke
3.42s
Suspension
weld in subframe connectors
lower control arm antisquat brackets
hotchkins panhard
Hotchkins strut tower brace
front suspension- Ground control coil overs with koni adjustable shocks
Rear suspension- eibach drop springs with tokico double adjustable shocks
all rubber replaced with POLY
fresh tie rod ends,Fresh brakes all the way around
sitting on ROH 17x9.5 wheels , tires have 75% tread
also has HD oil and power steering cooler
im probably missing some extras
asking 7,200
price is obo!!
serious inquiries only please cell# two2five 405- four12four . if i dont answer leave a message
thanks! Daryn




heres the break down of everything it has
130k- .Chameleon green ( changes color in sunlight).no t tops clean cloth seats , no rips runs a 12.20 @ 110 on street tires
interior 8/10 (no rips or tears on seats!)
exterior7/10 paint is spidered on the front bumber ( barely notice it)... someone backed in to the back bumber and spidered the paint also, and there is a dime size chip next to the gas filler door
Motor runs very strong,
224/230 . 575 lift .114 lsa cam from synergy motorsports,
dual valve springs,
hardened pushrods,
Svo 30# injectors,
LS6 intake
ported throttle body,
Slp Lid
Lpp ceramic coated long tube headers
Ceramic coated V band Y pipe with 2 sets of cats and test pipes
Hooker aerochamber exhuast
Trans-
t56
hurst shirter with short stick
Ls6 clutch (25k)
PST carbon fiber driveshaft with forged yoke
3.42s
Suspension
weld in subframe connectors
lower control arm antisquat brackets
hotchkins panhard
Hotchkins strut tower brace
front suspension- Ground control coil overs with koni adjustable shocks
Rear suspension- eibach drop springs with tokico double adjustable shocks
all rubber replaced with POLY
fresh tie rod ends,Fresh brakes all the way around
sitting on ROH 17x9.5 wheels , tires have 75% tread
also has HD oil and power steering cooler
im probably missing some extras
asking 7,200
price is obo!!
serious inquiries only please cell# two2five 405- four12four . if i dont answer leave a message
thanks! Daryn




Last edited by Daryn; May 11, 2011 at 12:46 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Fast86z
GM Engine & Exhaust Performance
4
Aug 23, 2015 12:35 AM
Suburban2500
INTERNAL ENGINE MODIFICATIONS
31
Jul 19, 2015 04:50 PM
grantpo
GM Drivetrain & Suspension
1
Jul 15, 2015 12:21 PM




