Going to go look at a project truck tomorrow
11-15-2014, 11:02 PM
#1
Teching In
Thread Starter
Join Date: Jun 2010
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Going to go look at a project truck tomorrow
2006 2500hd reg cab long box 2wd.
6.0 engine 156k miles on it.
Guy wants 2k for it. no rust looks to be in good shape.
I want to put a 3200 stall, cam lower it, and run sticky tires and go hit the track ideally I wanted 4x4 but for 2k and the condition the truck is in hard to pass up.
Any thoughts? Things I should watch out for? He says the powersteering oil gets hot and it tends to stop working? new powersteering pump I assume.
I assume for traction I will need a LSD and traction bars.
6.0 engine 156k miles on it.
Guy wants 2k for it. no rust looks to be in good shape.
I want to put a 3200 stall, cam lower it, and run sticky tires and go hit the track ideally I wanted 4x4 but for 2k and the condition the truck is in hard to pass up.
Any thoughts? Things I should watch out for? He says the powersteering oil gets hot and it tends to stop working? new powersteering pump I assume.
I assume for traction I will need a LSD and traction bars.
Thread
Thread Starter
Forum
Replies
Last Post