Radix Owner's, new Metco 100mm pulleys = more pulley wrap
06-11-2005, 11:44 AM
#1
Radix Owner's, new Metco 100mm pulleys = more pulley wrap
I replaced the two 3.5"(approx) Magnacharger supplied idler pulleys with Metco 100mm idler pulleys to get more blower pulley wrap, especially if I pulley down in the future, and to aleviate the belt from jumping off the standard setup.
if anyone is interested in how this is done just let me know
otherwise, enjoy the pics 
if anyone is interested in how this is done just let me know
otherwise, enjoy the pics
Last edited by moregrip; 09-08-2007 at 11:04 PM.
06-11-2005, 11:49 AM
#3
TECH Addict
iTrader: (5)
Join Date: Apr 2002
Location: Poulsbo, WA
Posts: 2,381
Likes: 0
Received 0 Likes
on
0 Posts
Where did you get the pulleys? I thought of that same issue in like March and checked all my local auto parts stores and their catalogs and found nothing. Who makes 'em and where can we get 'em?
It does look very nice by the way!
It does look very nice by the way!
06-11-2005, 01:08 PM
#6
Originally Posted by Flipper
Grippy,
Lots of bling - Radix - stage 2 - heads - $4,000 worth of wheels and tires - Interior mods - locker - ect.......
and
STOCK FAN??
Lots of bling - Radix - stage 2 - heads - $4,000 worth of wheels and tires - Interior mods - locker - ect.......
and
STOCK FAN??
still trying to get a harness for them, the actual 05 efans are right here all safe and sound though
However, since I have an 05, I'm going to look through my 05 manuals and see if I might have the option of hooking them up using the factory components, I used to have a VIN for an 05 truck with factory efans, but alas, I went overboard cleaning up outlook one day
06-11-2005, 01:09 PM
#7
Originally Posted by Baumgardner2051
Looks sharp!
oh yeah, and polishing up that tensioner was lots of fun too
Trending Topics
06-11-2005, 01:14 PM
#9
Originally Posted by CHarris
Where did you get the pulleys? I thought of that same issue in like March and checked all my local auto parts stores and their catalogs and found nothing. Who makes 'em and where can we get 'em?
It does look very nice by the way!
It does look very nice by the way!
06-11-2005, 01:29 PM
#10
What Is The Diameter
Originally Posted by moregrip
believe it or not, there is alot of research tied up in those two pulleys
Did you have to change the belt size?
How much gap is there between the belt at the center line of the pullys?
Just so happens I have some 4" aluminum stock under my lathe.