GM Parts Classifieds For Sale and Wanted

For Sale....TR220 CAM

Thread Tools
 
Search this Thread
 
Old Jun 13, 2009 | 03:53 AM
  #1  
grey matter 04's Avatar
Thread Starter
13 Second Truck Club
iTrader: (9)
 
Joined: Jul 2008
Posts: 1,455
Likes: 1
From: gonzales,LA
Default For Sale....TR220 CAM

For Sale....SOLD
1 brand new thunder racing TR220/220 .551 lift 114 lobe sep
New in box never taken out the bag!
Was purchased new from thunder and now i have changed my mind AGAIN!
Asking $325,retail is 399

Also a brand new set of yellow LS6 springs
Asking $55


Thanks cody

Last edited by grey matter 04; Oct 5, 2010 at 11:43 PM.
Reply
Old Jun 13, 2009 | 05:27 AM
  #2  
coryhussey's Avatar
On The Tree
iTrader: (2)
 
Joined: Dec 2006
Posts: 141
Likes: 0
From: lasalle ontario canada
Default

definetely interested in this cam. were you going to use 7.4 hardened pushrods. I have a stock z06 cam with yellow springs and zo6 pushrods. not sure if its gonna be good enough to run with this cam.
Reply
Old Jun 13, 2009 | 09:39 AM
  #3  
grey matter 04's Avatar
Thread Starter
13 Second Truck Club
iTrader: (9)
 
Joined: Jul 2008
Posts: 1,455
Likes: 1
From: gonzales,LA
Default

yes 7.4 harden push rods are a must
and Ls6 springs wont work with this cam because of the aggressive ramp rate
Reply
Old Jun 13, 2009 | 10:00 AM
  #4  
RandomHero's Avatar
TECH Veteran
iTrader: (24)
 
Joined: Jun 2005
Posts: 4,787
Likes: 1
From: Austin,TX Name:Mark
Default

Originally Posted by slow n low 4.8
yes 7.4 harden push rods are a must
and Ls6 springs wont work with this cam because of the aggressive ramp rate
plenty of people have used ls6 springs with a tr220.
Reply
Old Jun 13, 2009 | 01:43 PM
  #5  
grey matter 04's Avatar
Thread Starter
13 Second Truck Club
iTrader: (9)
 
Joined: Jul 2008
Posts: 1,455
Likes: 1
From: gonzales,LA
Default

Originally Posted by RandomHero
plenty of people have used ls6 springs with a tr220.
you are more than welcome to try,but thunder advised me not to because of the aggressive ramp rate of the lobe
Rather be safe than ruin a good cam.
Reply
Old Jun 13, 2009 | 01:57 PM
  #6  
lucky77's Avatar
Banned
iTrader: (4)
 
Joined: Sep 2008
Posts: 443
Likes: 0
Default

i would not put ls6 springs on 581 lift cam . .. . . go atleast PAC or new design 918's
Reply
Old Jun 13, 2009 | 03:14 PM
  #7  
LsxCody's Avatar
TECH Fanatic
15 Year Member
iTrader: (3)
 
Joined: Oct 2008
Posts: 1,686
Likes: 1
From: Virginia!!!!
Default

Its a .551 lift cam
Reply
Old Jun 14, 2009 | 10:37 AM
  #8  
coryhussey's Avatar
On The Tree
iTrader: (2)
 
Joined: Dec 2006
Posts: 141
Likes: 0
From: lasalle ontario canada
Default

yeah im not too sure if this cam will work with my stock z06 pushrods and springs. Might need to upgrade to 918' and 7.4 hardened pushrods. may have to pass right now on the cam.
Reply
Old Jun 14, 2009 | 04:41 PM
  #9  
grey matter 04's Avatar
Thread Starter
13 Second Truck Club
iTrader: (9)
 
Joined: Jul 2008
Posts: 1,455
Likes: 1
From: gonzales,LA
Default

you should buy it and set it aside for later
325 for a brand new cam,u cant beat that!
Reply
Old Jun 16, 2009 | 12:36 PM
  #10  
grey matter 04's Avatar
Thread Starter
13 Second Truck Club
iTrader: (9)
 
Joined: Jul 2008
Posts: 1,455
Likes: 1
From: gonzales,LA
Default

nobody wants a 220 cam?
Reply



All times are GMT -5. The time now is 07:21 PM.