Ford Tbar keys on GM?
May 6, 2006 | 01:19 AM
#1
Thread Starter
TECH Senior Member
iTrader: (10)
Joined: Nov 2001
Posts: 8,768
Likes: 0
From: Gainesville, Denton TX
Ford Tbar keys on GM?
I remember seeing some people doing this a long time ago on fullsizechevy... but has anyone done the ford tbar keys on a gm?
Anyone have a partnumber on what I'd need for my CC 1500?
Thanks
Brando
Anyone have a partnumber on what I'd need for my CC 1500?
Thanks
Brando
May 6, 2006 | 11:15 PM
#2
Staging Lane
Joined: May 2006
Posts: 88
Likes: 0
From: greenville ms
i just put ford keys in a 05 z71 i dont know the part number but all you have to do is go to a ford dealer and tell them you need torsion bar keys for a 97-03 f-150 then is really easy to put them in.
Trending Topics
May 9, 2006 | 10:01 PM
#9
Staging Lane
Joined: May 2006
Posts: 88
Likes: 0
From: greenville ms
you get roughly two inchs of lift. depending on which torsion bars the truck has in it. i've installed 20 and 25 sets i've seen between an inch and a half to three and a quarter. enough to fit 33s may 34s on a factory wheel
May 10, 2006 | 02:46 AM
#10
TECH Apprentice
Joined: Oct 2005
Posts: 389
Likes: 0
From: Merrillville, Indiana
Originally Posted by munchman
you get roughly two inchs of lift. depending on which torsion bars the truck has in it. i've installed 20 and 25 sets i've seen between an inch and a half to three and a quarter. enough to fit 33s may 34s on a factory wheel
Your telling me theres more then one type of torsen bars on our trucks>?