PerformanceTrucks.net Forums
0 2020/11/14 20:24:06
0 2020/11/14 20:22:18
0 2020/11/14 20:15:41
Oh my God this was very difficult to insert the vent back into the vent cut-out
Oh my God this was very difficult to insert the vent back into the vent cut-out
0 2020/11/14 20:10:28
This was the third brake light gasket that I purchased off of eBay - June 19, 2020
This was the third brake light gasket that I purchased off of eBay - June 19, 2020
0 2020/11/14 20:03:28
I used the piece that I cut from the center; further customized it by cutting enough space for the original flaps and glued on bigger flap on outside of the vent.
I used the piece that I cut from the center; further customized it by cutting enough space for the original flaps and glued on bigger flap on outside of the vent.
0 2020/11/14 19:55:04
My first attempt to produce a customized cabin air pressure vent gasket - May 25, 2020
My first attempt to produce a customized cabin air pressure vent gasket - May 25, 2020
0 2020/11/14 19:50:18
0 2020/01/07 09:48:18
Fed the nylon trimmer string upward through the rear passenger drain tube until it cleared through the sun roof's top rear drain weep hole
Fed the nylon trimmer string upward through the rear passenger drain tube until it cleared through the sun roof's top rear drain weep hole
0 2020/01/07 09:33:33
Rear sunroof drain tube feeding upward into the ??? door frame and down the rear passenger pillar towards the air pressure vent
Rear sunroof drain tube feeding upward into the ??? door frame and down the rear passenger pillar towards the air pressure vent
0 2020/01/07 09:24:25
Rear sunroof drain tube connection at the sunroof drain pan
Rear sunroof drain tube connection at the sunroof drain pan
0 2020/01/07 09:20:23
Front passenger side sunroof drain tube at the pillar
Front passenger side sunroof drain tube at the pillar
0 2020/01/07 09:14:40
Front passenger side sunroof drain tube
Front passenger side sunroof drain tube
0 2020/01/07 09:09:18
November 9, 2019, 1st Attempt applying VersaChem Clear Super Silicone Gasket Maker; either I did a poor job or I used the wrong product for the solution - maybe both
November 9, 2019, 1st Attempt applying VersaChem Clear Super Silicone Gasket Maker; either I did a poor job or I used the wrong product for the solution - maybe both
0 2020/01/04 10:48:37
November 09, 2019 attempt to remove old gasket and apply a silicone gasket maker
November 09, 2019 attempt to remove old gasket and apply a silicone gasket maker
0 2019/12/31 20:19:24
Day 1
Day 1
0 2019/12/31 20:05:06
OEM Jounce Bumper in 2017 - it fell off in the Lowe's parking lot in May 2019
OEM Jounce Bumper in 2017 - it fell off in the Lowe's parking lot in May 2019
0 2019/06/26 12:16:47
0 2018/10/20 18:52:50
0 2017/10/30 21:01:06
0 2017/10/30 20:50:19
0 2017/10/30 20:47:08
0 2017/10/30 20:46:19
0 2017/10/30 20:45:27
0 2017/10/30 20:44:33
0 2017/10/30 20:40:08
0 2017/10/30 20:39:13
0 2017/10/30 20:38:25
0 2017/10/30 20:37:39
0 2017/10/30 20:36:47
0 2017/10/30 20:35:58
0 2017/10/30 20:35:06
0 2017/10/30 20:29:51
0 2017/10/30 20:29:02
0 2017/10/30 20:28:12
0 2017/10/30 20:27:25
0 2017/10/30 20:26:39
0 2017/10/30 20:25:45
0 2017/10/30 20:24:52
0 2017/10/30 20:19:25
0 2017/10/30 20:18:37