PerformanceTrucks.net Forums
The rear of the vette/4wd case, on 2wd one of the divets at 6 and 12 oclock to the shaft are open
The rear of the vette/4wd case, on 2wd one of the divets at 6 and 12 oclock to the shaft are open
0 2016/10/18 09:19:02
0 2016/10/16 17:49:00
Seat harness connector is corroded pretty good on passenger side, but for ow seat is working fine!!!
Seat harness connector is corroded pretty good on passenger side, but for ow seat is working fine!!!
0 2016/10/16 17:48:55
Truck/camaro torque converter/bellhousing
Truck/camaro torque converter/bellhousing
0 2016/10/16 07:21:26
Truck output shaft
Truck output shaft
0 2016/10/16 07:21:19
Vette bellhouing
Vette bellhouing
0 2016/10/16 07:21:10
Here is how my trabs started out a vette trans with ridiculously long output shaft
Here is how my trabs started out a vette trans with ridiculously long output shaft
0 2016/10/16 07:20:54
0 2016/10/13 14:31:55
This was about an hour or so ago... Only issue with the 99 was i had to jump it, which i kind of expected...
This was about an hour or so ago... Only issue with the 99 was i had to jump it, which i kind of expected...
0 2016/10/09 16:14:11
0 2016/10/09 06:10:01
Pictures from my second story bedroom window
Pictures from my second story bedroom window
0 2016/10/09 06:09:44
And to the body on the yukon....
And to the body on the yukon....
0 2016/10/08 19:06:41
At 9;45pm the water was damn near to the hubs on the 99
At 9;45pm the water was damn near to the hubs on the 99
0 2016/10/08 19:06:40
I moved my car into the yard.... Figure it afforded me about an extra 6-8 inches
I moved my car into the yard.... Figure it afforded me about an extra 6-8 inches
0 2016/10/08 19:06:38
Found a connector to use to replace the bundle of butt connectors i currently have to conect the fpcm and bank 1 downstream o2, sadly it is a fuel injector harness connector from a 2.4 equinox....
Found a connector to use to replace the bundle of butt connectors i currently have to conect the fpcm and bank 1 downstream o2, sadly it is a fuel injector harness connector from a 2.4 equinox....
0 2016/10/07 16:51:28
So am much as i dislike the mechanical side of the 2014 and up trucks i found one that may make me get one.... Realtree edition!!! However until i get some other stuff taken care of that isnt going to happen.... So in the meantime i had the guy that does all the graphics at work make a set similar to the door graphics but in a slightly different realtree pattern...
So am much as i dislike the mechanical side of the 2014 and up trucks i found one that may make me get one.... Realtree edition!!! However until i get some other stuff taken care of that isnt going to happen.... So in the meantime i had the guy that does all the graphics at work make a set similar to the door graphics but in a slightly different realtree pattern...
0 2016/10/06 20:42:29
0 2016/10/05 19:16:09
0 2016/10/05 19:16:08
0 2016/10/03 21:19:26
This was the yukon....
This was the yukon....
0 2016/09/30 14:27:03
This was my 99.... Which went from an engine swap to every mod i could do... Lol
This was my 99.... Which went from an engine swap to every mod i could do... Lol
0 2016/09/30 14:24:43
0 2016/09/30 14:24:39
0 2016/09/26 20:55:54
0 2016/09/25 20:07:07
Id check to see if theres any corrosion in the x109 connector....
Id check to see if theres any corrosion in the x109 connector....
0 2016/09/25 17:56:42
And she is officially back together, aside from a couple odd and ends....
And she is officially back together, aside from a couple odd and ends....
0 2016/09/16 20:09:45
All 4 of the fascia to fender bolts broke coming off along with the speed nuts on the lower fascia brackets..
All 4 of the fascia to fender bolts broke coming off along with the speed nuts on the lower fascia brackets..
0 2016/09/16 20:09:38
Pic sucks, but bolts are out, a little heat and a stud extra tor and the came right out through the inner wall of the fender....
Pic sucks, but bolts are out, a little heat and a stud extra tor and the came right out through the inner wall of the fender....
0 2016/09/16 20:09:33
And the mechanical portion of the swap is done....
And the mechanical portion of the swap is done....
0 2016/09/16 19:47:43
All 4 of the fascia to fender bolts broke, along with the speed nut on the left side lower fascia to bumper bracket....
All 4 of the fascia to fender bolts broke, along with the speed nut on the left side lower fascia to bumper bracket....
0 2016/09/16 19:47:37
This picture sucks, but both of the bolts are out... On both sides!!
This picture sucks, but both of the bolts are out... On both sides!!
0 2016/09/16 19:47:31
0 2016/09/15 15:29:46
0 2016/09/15 15:29:37
0 2016/09/15 15:29:33
0 2016/09/15 15:29:26
Really generic picture but gives you the idea
Really generic picture but gives you the idea
0 2016/09/12 22:49:08
0 2016/09/10 17:03:29
0 2016/09/10 17:03:26
Y pipe clearance..... The level check plug is a little more directly over the pipe than i like....
Y pipe clearance..... The level check plug is a little more directly over the pipe than i like....
0 2016/09/10 17:03:02
By 1:30 had t case driveshaft trans cross member etc all bolted in and buttoned up
By 1:30 had t case driveshaft trans cross member etc all bolted in and buttoned up
0 2016/09/10 17:02:57