PerformanceTrucks.net Forums
0 2018/12/03 17:24:35
that is all scrap. its the suburban that the interior came out of and it weighed 1640 lbs on top of a 2500 lbs trailer. this truck isnt really setup to tow and doesnt control the trailer brakes, but it had no issues stopping this trailer with the brake upgrade where my 2018 gmc does with the brake controller turned off
that is all scrap. its the suburban that the interior came out of and it weighed 1640 lbs on top of a 2500 lbs trailer. this truck isnt really setup to tow and doesnt control the trailer brakes, but it had no issues stopping this trailer with the brake upgrade where my 2018 gmc does with the brake controller turned off
0 2018/12/03 17:22:28
so since he has 6k miles on it, i decided to get the greatest accomplishment and decided to hook it up to the trailer it did most of its travel on to outside shops such as the exhaust shop and to get tuned
so since he has 6k miles on it, i decided to get the greatest accomplishment and decided to hook it up to the trailer it did most of its travel on to outside shops such as the exhaust shop and to get tuned
0 2018/12/03 17:21:08
one of the grey plastic nipples on the gas tank cracked down the center causing it to dump fuel when filling up with fuel
one of the grey plastic nipples on the gas tank cracked down the center causing it to dump fuel when filling up with fuel
0 2018/12/03 17:20:18
these lights came on, so i had to replace the abs module
these lights came on, so i had to replace the abs module
0 2018/12/03 17:19:44
something later on, but managed to score a 28 gallon fuel cell for $120 and it doesnt leak
something later on, but managed to score a 28 gallon fuel cell for $120 and it doesnt leak
0 2018/08/26 16:14:51
i got super lucky and came across a buddy replacing an engine in a 07 silverado and managed to score the heads off the core engine and send the iron heads back with the core
i got super lucky and came across a buddy replacing an engine in a 07 silverado and managed to score the heads off the core engine and send the iron heads back with the core
0 2018/08/26 16:11:12
0 2018/08/26 16:11:03
0 2018/08/26 16:10:54
0 2018/08/26 16:10:42
Removed everything related to the air bag system, and excess wires for options this truck does not have and the factory speaker wires
Removed everything related to the air bag system, and excess wires for options this truck does not have and the factory speaker wires
0 2018/08/26 16:10:30
Pulled the BCM and complete Cab harness
Pulled the BCM and complete Cab harness
0 2018/08/26 16:10:20
main dash support removed
main dash support removed
0 2018/08/26 16:10:06
0 2018/06/21 17:06:34
and for those wondering, hes pulling about 15 MPG on the highway on 87 octane with the iron 5.7, 243 heads 216/220 114 lsa cam 4.10 gears and 2300 stall converter
and for those wondering, hes pulling about 15 MPG on the highway on 87 octane with the iron 5.7, 243 heads 216/220 114 lsa cam 4.10 gears and 2300 stall converter
0 2018/06/21 16:03:50
0 2018/06/21 16:03:41
height comparison between it and a stock 2016 Ram Power wagon on a 35x12.50r17
height comparison between it and a stock 2016 Ram Power wagon on a 35x12.50r17
0 2018/06/21 16:03:33
got a bed cover for it
got a bed cover for it
0 2018/06/21 16:03:07
0 2018/06/21 16:02:55
the guy has put about 3k miles on the truck so far, and hes very happy with it.
the guy has put about 3k miles on the truck so far, and hes very happy with it.
0 2018/06/21 16:02:13
0 2018/06/21 16:01:07
0 2018/06/21 16:00:59
0 2018/06/21 16:00:50
0 2018/06/21 16:00:41
0 2018/06/21 16:00:32
0 2018/06/21 16:00:24
0 2018/06/21 16:00:14
0 2018/06/21 15:59:59
0 2018/06/21 15:59:46
0 2018/06/21 15:59:19
0 2018/06/21 15:59:10
0 2018/06/21 15:58:58
0 2018/06/21 15:58:45
0 2018/06/21 15:53:39
bed removed
bed removed
0 2018/06/21 15:53:25
pulled the rear tires off, sat it on jack stands and used the winch on the car hauler to yank the bed off since it was filled with nothing but scrap steel and was heavy as shit. seeing as the bed was already junk didnt care how damaged the bed was
pulled the rear tires off, sat it on jack stands and used the winch on the car hauler to yank the bed off since it was filled with nothing but scrap steel and was heavy as shit. seeing as the bed was already junk didnt care how damaged the bed was
0 2018/06/21 15:51:53
started pulling the bed, the rear bumper was tweaked so bad that even with everything unbolted i had to hook a chain and yank it off with my truck
started pulling the bed, the rear bumper was tweaked so bad that even with everything unbolted i had to hook a chain and yank it off with my truck
0 2018/06/21 15:50:51
picked up a front axle. its from a 3rd gen ram 2500 its an aam 9.25 and already has 4.56 gears. just have to do a free spin hub conversion to get rid of the unit bearings and put a selectable locker in
picked up a front axle. its from a 3rd gen ram 2500 its an aam 9.25 and already has 4.56 gears. just have to do a free spin hub conversion to get rid of the unit bearings and put a selectable locker in
0 2018/06/21 15:48:47
0 2018/06/21 15:48:33
got a matching set of wheels and tires for rollers. my mom has a power wagon and got new wheels and tires so her old tires got thrown on this just so all 4 matched
got a matching set of wheels and tires for rollers. my mom has a power wagon and got new wheels and tires so her old tires got thrown on this just so all 4 matched
0 2018/06/21 15:48:03