PerformanceTrucks.net Forums
0 2024/06/06 10:00:21
0 2024/10/27 12:25:42
0 2024/10/27 12:25:46
0 2024/10/27 12:25:50
0 2024/10/27 12:25:53
0 2024/11/03 06:32:56
0 2024/11/03 06:33:00
Ordered a hydroboost unit from a 04 2500 6.0
Ordered a hydroboost unit from a 04 2500 6.0
0 2024/11/16 16:25:19
Pressing out one of the studs because it doesn’t match the holes in firewall.
Pressing out one of the studs because it doesn’t match the holes in firewall.
0 2024/11/16 16:25:23
0 2024/11/16 16:25:29
Had to open up the top of the hole in the firewall a little for the hydroboost unit to clear.
Had to open up the top of the hole in the firewall a little for the hydroboost unit to clear.
0 2024/11/16 16:25:32
Used this ti clean it up after the rough bit.
Used this ti clean it up after the rough bit.
0 2024/11/16 16:25:38
You can see the top of the hole where i opened it up a bit.
You can see the top of the hole where i opened it up a bit.
0 2024/11/16 16:25:42
Down by the sticker you can see the hole that doesn’t line up. I will either drill the hole in the firewall or make a different hole in the mounting plate. Leaning towards making different hole in the mounting plate.
Down by the sticker you can see the hole that doesn’t line up. I will either drill the hole in the firewall or make a different hole in the mounting plate. Leaning towards making different hole in the mounting plate.
0 2024/11/16 16:25:45
3 bolts holding it in so I can work on the brake pedal.
3 bolts holding it in so I can work on the brake pedal.
0 2024/11/16 16:25:48
The mounting point for the rod coming out of the hydroboost needs to be higher on the brake pedal. You can see where I marked it with black marker.
The mounting point for the rod coming out of the hydroboost needs to be higher on the brake pedal. You can see where I marked it with black marker.
0 2024/11/16 16:25:52
Couple hammer shots and knocked it out of the factory spot.
Couple hammer shots and knocked it out of the factory spot.
0 2024/11/16 16:25:55
Drilling new spot.
Drilling new spot.
0 2024/11/16 16:25:58
0 2024/11/16 16:26:01
0 2024/11/16 16:26:04
0 2024/11/16 16:26:07
Had my buddy weld it in after drilling a 5/8ths hole and dropping it in.
Had my buddy weld it in after drilling a 5/8ths hole and dropping it in.
0 2024/11/16 16:26:10
0 2024/11/16 16:26:13
0 2025/10/13 16:12:05
0 2025/10/13 16:12:10