PerformanceTrucks.net Forums
Looks like another filter broke off and is sitting in the tank with some plastic pieces. Of course truck broke with a full tank of gas :)
Looks like another filter broke off and is sitting in the tank with some plastic pieces. Of course truck broke with a full tank of gas :)
0 2018/10/25 08:03:48
Walbro 450 does this look like a fake?
Walbro 450 does this look like a fake?
0 2018/10/25 08:03:48
This thing was barely held together.
This thing was barely held together.
0 2018/10/25 08:03:48
How I did my bed lift. Not the safest but eh. Also found out the truck only had 4 out of the 8 bed bolts to the frame.
How I did my bed lift. Not the safest but eh. Also found out the truck only had 4 out of the 8 bed bolts to the frame.
0 2018/10/25 08:03:47
First time wrapping manifolds. I think it's good enough. Zip tie will come off after I find something to replace it with
First time wrapping manifolds. I think it's good enough. Zip tie will come off after I find something to replace it with
0 2018/10/24 10:32:09
Huron Speed Log. Is that smaller pipe sticking out from the front bottom where the waste gate goes? I'm really smart.
Huron Speed Log. Is that smaller pipe sticking out from the front bottom where the waste gate goes? I'm really smart.
0 2018/10/23 08:57:44
74mm Precision Turbo with T4 Flange
74mm Precision Turbo with T4 Flange
0 2018/10/23 08:57:44
When you have had such bad luck you have trust issues.
When you have had such bad luck you have trust issues.
0 2018/10/23 08:57:43
Make sure the words "Front" are facing towards the front of the engine or timing cover
Make sure the words "Front" are facing towards the front of the engine or timing cover
0 2018/10/19 10:57:14
Put lifters into the trays masking sure the roller of the lifters are facing the correct way so they spin on the cam. Then place the tray in while it's holding all four lifters
Put lifters into the trays masking sure the roller of the lifters are facing the correct way so they spin on the cam. Then place the tray in while it's holding all four lifters
0 2018/10/19 10:57:14
Oil Pan on. Make sure you follow torquing specs and order for no leaks. I put black RTV on all 4 corners of the block before the oil pan gasket and the pan.
Oil Pan on. Make sure you follow torquing specs and order for no leaks. I put black RTV on all 4 corners of the block before the oil pan gasket and the pan.
0 2018/10/19 10:57:14
Picture of my fitting I had welded on. Will this be ok and above the oil level? I've seen others put there's here.
Picture of my fitting I had welded on. Will this be ok and above the oil level? I've seen others put there's here.
0 2018/10/19 10:57:14
After cleaning up the top end I saw this little gem. I guess the guy also did some drilling into the throttle body. This makes me think that he never tuned the truck after the cam was install.
After cleaning up the top end I saw this little gem. I guess the guy also did some drilling into the throttle body. This makes me think that he never tuned the truck after the cam was install.
0 2018/10/17 13:39:22
0 2018/10/17 13:38:55
Mmm Forged Pistons and H Beam Forged Rods
Mmm Forged Pistons and H Beam Forged Rods
0 2018/10/17 09:58:23
.660 Dual BTR Valve Springs
.660 Dual BTR Valve Springs
0 2018/10/17 09:52:16
Stuck the Heads on just for some pictures
Stuck the Heads on just for some pictures
0 2018/10/17 09:52:16
Drilled and Tapped for the oil feed. Used 1/4" drill bit all the way in then 25/64 bit for the fitting and then 7/16-20 tap.
Drilled and Tapped for the oil feed. Used 1/4" drill bit all the way in then 25/64 bit for the fitting and then 7/16-20 tap.
0 2018/10/17 09:52:15
Block came in from Schwanke Racing Engines (Jeremy was awesome)
Block came in from Schwanke Racing Engines (Jeremy was awesome)
0 2018/10/17 09:52:15
Block came in from Schwanke Racing Engines (Jeremy was awesome)
Block came in from Schwanke Racing Engines (Jeremy was awesome)
0 2018/10/17 09:52:15
Milled .020 off my LQ4 317 Heads
Milled .020 off my LQ4 317 Heads
0 2018/10/17 09:52:15
Mmm Forged Pistons and H Beam Forged Rods
Mmm Forged Pistons and H Beam Forged Rods
0 2018/10/17 09:52:15
0 2018/10/17 09:20:57
0 2018/10/17 09:20:44
0 2018/10/17 09:20:44
0 2018/10/17 09:20:00
0 2018/10/17 09:17:04
0 2018/10/17 09:17:04
0 2018/10/17 09:16:47
0 2018/10/17 09:16:47
0 2018/10/17 09:16:47
0 2018/10/17 09:16:47
Valve Cover 2
Valve Cover 2
0 2018/10/17 09:14:27
Valve Cover 2
Valve Cover 2
0 2018/10/17 09:14:26
Valve Cover 1
Valve Cover 1
0 2018/10/17 09:14:04
Valve Cover 1
Valve Cover 1
0 2018/10/17 09:14:04
0 2018/10/17 09:13:24
0 2018/10/17 09:13:23
0 2018/10/17 09:13:23
0 2018/10/17 09:13:23