PerformanceTrucks.net Forums
0 2017/03/02 21:57:29
0 2017/03/02 22:00:54
0 2017/03/02 22:01:05
0 2017/03/02 22:01:09
0 2017/03/02 22:01:15
0 2017/03/02 22:01:23
0 2017/03/02 22:01:26
0 2017/03/02 22:01:32
Removed the oil pan to have a -10 drain welded on by a buddy of my that will also be doing the tuning in the truck!
Removed the oil pan to have a -10 drain welded on by a buddy of my that will also be doing the tuning in the truck!
0 2017/03/02 22:08:56
Throw the motor all back together... Fuel rails did not stay...
Throw the motor all back together... Fuel rails did not stay...
0 2017/03/02 22:09:14
Picked up a core 4l80e to be built. Going with a nice rebuild with a billet input shaft and billet forward clutch hub and few modifications to the valve body and good set of clutches.
Picked up a core 4l80e to be built. Going with a nice rebuild with a billet input shaft and billet forward clutch hub and few modifications to the valve body and good set of clutches.
0 2017/03/02 22:09:20
Derided to go with a Inovate wideband/boost controller due to the nice price and dual functionality it provides plus it's had to beat for the price!
Derided to go with a Inovate wideband/boost controller due to the nice price and dual functionality it provides plus it's had to beat for the price!
0 2017/03/02 22:09:24
Progress I made with mounting up set of ls1 fans on my hd radiator or the 05-06 1500 wider version radiator what you like to call it. Using a Nelson performance fan harness so I can control them like stock.
Progress I made with mounting up set of ls1 fans on my hd radiator or the 05-06 1500 wider version radiator what you like to call it. Using a Nelson performance fan harness so I can control them like stock.
0 2017/03/02 22:09:27
0 2017/03/02 22:09:31
Long story short there was broken fuel line on the truck that had been patched with rubber hose... I just decided now was the time to just bite the bullet and do -8 feed and -6 return lines while I was this far so I gutted the factory fuel system and evap system.
Long story short there was broken fuel line on the truck that had been patched with rubber hose... I just decided now was the time to just bite the bullet and do -8 feed and -6 return lines while I was this far so I gutted the factory fuel system and evap system.
0 2017/03/02 22:16:15
Mounted aeromotive boost reference fuel pressure regulator.
Mounted aeromotive boost reference fuel pressure regulator.
0 2017/03/02 22:20:39
Got the new rails and fuel lines in!
Got the new rails and fuel lines in!
0 2017/03/02 22:20:46
Mounted the new rails... Took a little bit of medication to get them to work but they turned it good!
Mounted the new rails... Took a little bit of medication to get them to work but they turned it good!
0 2017/03/02 22:20:56
So much room for activities with the bed removed...
So much room for activities with the bed removed...
0 2017/03/02 22:21:14
Got some lines built and plumbed at the tank!
Got some lines built and plumbed at the tank!
0 2017/03/02 22:21:20
Few pics of the few rails!
Few pics of the few rails!
0 2017/03/02 22:21:31
0 2017/03/02 22:21:37
Like built and routed!
Like built and routed!
0 2017/03/02 22:21:42
0 2017/03/02 22:21:45
Summit -8an 10 micron fuel filter!
Summit -8an 10 micron fuel filter!
0 2017/03/02 22:21:51
0 2017/03/02 22:27:41
0 2017/03/02 22:27:49
0 2017/03/02 22:28:03
0 2017/03/02 22:28:09
0 2017/03/02 22:28:21
Degreased and cleaned the frame for paint later.
Degreased and cleaned the frame for paint later.
0 2017/03/08 06:45:19
Removed leafs for axle flip and to install bushing for caltracs and removed overload leaf
Removed leafs for axle flip and to install bushing for caltracs and removed overload leaf
0 2017/03/08 06:45:22
New coil springs and flip kit
New coil springs and flip kit
0 2017/03/08 06:45:26
Ac delco replacement stock height springs due to someone heating the orginal up...
Ac delco replacement stock height springs due to someone heating the orginal up...
0 2017/03/08 06:45:28
Little frame painting
Little frame painting
0 2017/03/08 06:45:30
Factory hangers. You wouldn't believe how hard it was to find these things lol
Factory hangers. You wouldn't believe how hard it was to find these things lol
0 2017/03/08 06:45:32
Grinder and cold chisel and they are off!
Grinder and cold chisel and they are off!
0 2017/03/08 06:45:33
Leaf installed and flip kit.
Leaf installed and flip kit.
0 2017/03/08 06:45:36
Caltracs 😎
Caltracs 😎
0 2017/03/08 06:45:38
More caltracs!
More caltracs!
0 2017/03/08 06:45:39