PerformanceTrucks.net Forums
Knocked pin out of 1-2 accumulator housing so i can clean it up at work and get the sonnax balls driven into it....
Knocked pin out of 1-2 accumulator housing so i can clean it up at work and get the sonnax balls driven into it....
0 2015/10/08 23:24:44
Original valve...
Original valve...
0 2015/10/08 23:24:48
Glad i pulled that!!!!
Glad i pulled that!!!!
0 2015/10/08 23:24:56
Pulled it all out!!! Wanted to make sure there was no more watery trans fluid in there!!!
Pulled it all out!!! Wanted to make sure there was no more watery trans fluid in there!!!
0 2015/10/08 23:25:04
New spring in
New spring in
0 2015/10/08 23:25:09
Sonnax purple pump spring
Sonnax purple pump spring
0 2015/10/08 23:25:31
New delco reman valve body.... $21+ shipping... Rockauto rocks!!! I got this and a full set of sonnax accumulators for something like $45 with shipping!!!!
New delco reman valve body.... $21+ shipping... Rockauto rocks!!! I got this and a full set of sonnax accumulators for something like $45 with shipping!!!!
0 2015/10/09 19:05:57
The new valve body separator that came with valve body, wish i knew that before i bought the other one last week :bang: guess ill be returning the other one!!!
The new valve body separator that came with valve body, wish i knew that before i bought the other one last week :bang: guess ill be returning the other one!!!
0 2015/10/09 19:06:04
Vette servo..... 15.00 shipped from amazon
Vette servo..... 15.00 shipped from amazon
0 2015/10/09 19:06:09
All the servo parts and accumulaor housing cleaned up!!!
All the servo parts and accumulaor housing cleaned up!!!
0 2015/10/09 19:06:14
Vette on left, oe on right A little comparison
Vette on left, oe on right A little comparison
0 2015/10/09 19:06:22
Top is vette, bottom OE
Top is vette, bottom OE
0 2015/10/09 19:06:28
Compressing spring housing into vette servo, used my ball joint press, to get snap ring back in
Compressing spring housing into vette servo, used my ball joint press, to get snap ring back in
0 2015/10/09 19:06:34
0 2015/10/09 19:06:38
Clip back on
Clip back on
0 2015/10/09 19:06:41
Painted servo cover... Aluminum paint, i really like that paint for accesory brackets etc
Painted servo cover... Aluminum paint, i really like that paint for accesory brackets etc
0 2015/10/09 19:06:46
And now for sonnax, balls in housing staked, half of my punches are broke waiting for snappy to get em replaced
And now for sonnax, balls in housing staked, half of my punches are broke waiting for snappy to get em replaced
0 2015/10/09 19:06:50
Inner sonnax spring installed
Inner sonnax spring installed
0 2015/10/09 19:06:54
Outer sonnax spring installed
Outer sonnax spring installed
0 2015/10/09 19:06:58
Piston installed, wave spring goes beneath it..
Piston installed, wave spring goes beneath it..
0 2015/10/09 19:07:06
Old tcc valve...
Old tcc valve...
1 2015/10/09 19:23:24
New one goin in with spring
New one goin in with spring
0 2015/10/09 19:23:29
Accumulator valve shim... PITA!!!
Accumulator valve shim... PITA!!!
0 2015/10/09 19:23:46
Forward accumulator plate off
Forward accumulator plate off
0 2015/10/09 19:24:01
Pin pulled, piston out!!!
Pin pulled, piston out!!!
0 2015/10/09 19:24:13
Both balls in and staked...shitty stake job BTW!!!
Both balls in and staked...shitty stake job BTW!!!
0 2015/10/09 19:24:18
I missed some pics, apparently!! Piston goes in spring next then cover... Was running out of time at work... So busy tonight!!! :jest:
I missed some pics, apparently!! Piston goes in spring next then cover... Was running out of time at work... So busy tonight!!! :jest:
0 2015/10/09 19:24:27
Hd 2-3 valve goin in!!!
Hd 2-3 valve goin in!!!
0 2015/10/09 19:24:35
My handy dandy accumulator valve shim installation tool... Lost a set of feeler guages somewhere....
My handy dandy accumulator valve shim installation tool... Lost a set of feeler guages somewhere....
0 2015/10/09 19:24:48
1/8" hole drilled through valve body for the hd2-3 shift valve as per sonnax instructions.....
1/8" hole drilled through valve body for the hd2-3 shift valve as per sonnax instructions.....
0 2015/10/11 22:53:06
Separator plate marked and drilled......
Separator plate marked and drilled......
0 2015/10/11 22:53:09
Well after a 12:30am walmart run for a $15 set of drill bits..... My pwm feed hole is plugged, gonna see if i cant use a real hammer and a vise at work to peen it a bit flatter tomorrow...
Well after a 12:30am walmart run for a $15 set of drill bits..... My pwm feed hole is plugged, gonna see if i cant use a real hammer and a vise at work to peen it a bit flatter tomorrow...
0 2015/10/12 21:58:31
Pwm plug peened... Amazing what two taps with an 8oz ball peen will do to a 1/16" piece of aluminum... :rotflmao:
Pwm plug peened... Amazing what two taps with an 8oz ball peen will do to a 1/16" piece of aluminum... :rotflmao:
0 2015/10/13 18:21:26
Separator plate post rust removal....
Separator plate post rust removal....
0 2015/10/13 18:22:00
Manifold switch....
Manifold switch....
0 2015/10/14 18:45:46
Bw input sprag
Bw input sprag
0 2015/10/14 18:45:55
Caught pump bushing pulling seal...... Damnit!!!
Caught pump bushing pulling seal...... Damnit!!!
0 2015/10/15 22:36:52
More carnage in the bottom of the pan....
More carnage in the bottom of the pan....
0 2015/10/15 22:36:56
Got that PITA drain plug out after 2 hours.... Any sugestions on what style to put back in there???
Got that PITA drain plug out after 2 hours.... Any sugestions on what style to put back in there???
0 2015/10/15 22:36:59
0 2015/10/15 22:37:00