PerformanceTrucks.net Forums
Share Your Pictures with Our Community. Upload Now
This is satisfying
This is satisfying
0 2024/09/09 10:33:38
0 2024/09/09 10:33:32
0 2024/09/09 10:33:26
Some 3d Printed fixtures to keep things in place while I weld on brackets.
Some 3d Printed fixtures to keep things in place while I weld on brackets.
0 2024/09/09 10:33:20
Prepping space for the "majik loop" Trying to decide how to get behind it cleanly.
Prepping space for the "majik loop" Trying to decide how to get behind it cleanly.
0 2024/09/09 10:33:15
more fit
more fit
0 2024/09/09 10:33:08
Fit up is really nice. Opted to do catted connections just because the truck is still on 93 and N/A so It wont stink in traffic.
Fit up is really nice. Opted to do catted connections just because the truck is still on 93 and N/A so It wont stink in traffic.
0 2024/09/09 10:33:03
0 2024/09/09 10:32:27
0 2024/09/09 10:31:53
First set of pipes done.
First set of pipes done.
0 2024/09/09 10:20:43
The "majik loop" adds length to the passenger side tube to give it that equal length sound. I know a lot of guys do this with a CTSV x-pipe. But being a 4x4, I couldn't do that.
The "majik loop" adds length to the passenger side tube to give it that equal length sound. I know a lot of guys do this with a CTSV x-pipe. But being a 4x4, I couldn't do that.
0 2024/09/09 10:20:37
TSP Headers getting V-bands as their y-pipe is no longer something you can order.
TSP Headers getting V-bands as their y-pipe is no longer something you can order.
0 2024/09/09 10:20:31
Advertisement
The goods.
The goods.
0 2024/09/09 10:20:23
Still no lift. Jackstands and ramps.
Still no lift. Jackstands and ramps.
0 2024/09/09 10:20:16
had to cut the bottom of the junk hole out. I'll 3D print a new bottom to glue in later.
had to cut the bottom of the junk hole out. I'll 3D print a new bottom to glue in later.
0 2024/09/09 10:13:40
Hideaway HS10 sub
Hideaway HS10 sub
0 2024/09/09 10:13:34
0 2024/09/08 17:27:09
0 2024/09/08 17:27:05
0 2024/09/08 17:27:01
0 2024/09/08 17:26:57
I will say the headers are darker in person. The camera/lighting throw it off on the lighter side.
I will say the headers are darker in person. The camera/lighting throw it off on the lighter side.
0 2024/09/08 17:26:52
0 2024/09/08 17:26:48
0 2024/09/08 17:26:44
0 2024/09/08 17:26:39
0 2024/09/08 17:20:58
This moves tge cable forward and I'm satisfied with clearance.
This moves tge cable forward and I'm satisfied with clearance.
0 2024/09/08 17:20:54
I found that the starter cable could stand to have a little more "air" between it and the header. So I flipped over the harness retaining clip and drilled an existing slot in the brake hose bracket and used the existing bolt, just had to add a nut.
I found that the starter cable could stand to have a little more "air" between it and the header. So I flipped over the harness retaining clip and drilled an existing slot in the brake hose bracket and used the existing bolt, just had to add a nut.
0 2024/09/08 17:20:49
Now there is a mile. Picture angle looks closer than actual. Header also torques away from it on acceleration.
Now there is a mile. Picture angle looks closer than actual. Header also torques away from it on acceleration.
0 2024/09/08 17:20:45
Did a little grinding.
Did a little grinding.
0 2024/09/08 17:20:41
Found a spot during mock up that could use a little clearance. Marked it.
Found a spot during mock up that could use a little clearance. Marked it.
0 2024/09/08 17:20:35
Just needs a little welding.
Just needs a little welding.
0 2024/09/08 17:18:58
0 2024/09/08 17:18:54
Advertisement