PerformanceTrucks.net Forums
Share Your Pictures with Our Community. Upload Now
Swaped the drivetrain over about 2 weekends ago. Spent a few hours yesterday putting the front end together.
Swaped the drivetrain over about 2 weekends ago. Spent a few hours yesterday putting the front end together.
0 2015/11/15 21:43:55
Donner rollover. Drive train and interior is mostly what I need. There was a few use able body kit pieces I saved though.
Donner rollover. Drive train and interior is mostly what I need. There was a few use able body kit pieces I saved though.
0 2015/11/15 21:40:48
0 2015/11/15 21:36:31
Started as a silver stripper... missing interior as well as the dash harness was partially cut out. No tail gate either.
Started as a silver stripper... missing interior as well as the dash harness was partially cut out. No tail gate either.
0 2015/11/15 21:35:36
0 2015/11/15 19:15:09
0 2015/11/15 14:06:10
0 2015/11/15 14:05:30
0 2015/11/15 13:35:35
0 2015/11/15 10:06:08
Here it is with the bed back on.
Here it is with the bed back on.
0 2015/11/15 09:40:17
I had to use a set front stoppers to keep the Rear-end From hitting the frame until I get the step notch In I had also moved the shackles down 2 holes.
I had to use a set front stoppers to keep the Rear-end From hitting the frame until I get the step notch In I had also moved the shackles down 2 holes.
0 2015/11/15 09:38:21
Rear-end rehung
Rear-end rehung
0 2015/11/15 09:38:06
Advertisement
3 inch drop Shakles
3 inch drop Shakles
0 2015/11/15 09:37:09
Rear-end free
Rear-end free
0 2015/11/15 09:36:10
Bed off
Bed off
0 2015/11/15 09:35:43
I got rid of the heavy 20s went to a set of factory 17s dipped the front bumper, grill, mirrors and door handles I also put in 3 inch drop Springs. Got Rid of the tinted Headlights and turn Signals to clear ones what the blues bulbs.
I got rid of the heavy 20s went to a set of factory 17s dipped the front bumper, grill, mirrors and door handles I also put in 3 inch drop Springs. Got Rid of the tinted Headlights and turn Signals to clear ones what the blues bulbs.
0 2015/11/15 09:30:01
Change headlight to tinted ones which I don't recommend As you can't see at night. Also put 20s on w/275*60*20s then did the bed cap.
Change headlight to tinted ones which I don't recommend As you can't see at night. Also put 20s on w/275*60*20s then did the bed cap.
0 2015/11/15 09:23:47
Here's where I brought it home!
Here's where I brought it home!
0 2015/11/15 09:15:19
0 2015/11/15 09:09:06
0 2015/11/15 05:51:49
Drum from this trans on top, my second core on bottom....
Drum from this trans on top, my second core on bottom....
0 2015/11/15 00:40:46
Burbt 3/4 clutch pack
Burbt 3/4 clutch pack
0 2015/11/15 00:28:47
Burnt 3/4 clutch plate
Burnt 3/4 clutch plate
0 2015/11/15 00:28:33
Thought input drum was galled turns out it was just caked on burnt fluid and friction material, cleaned right up....
Thought input drum was galled turns out it was just caked on burnt fluid and friction material, cleaned right up....
0 2015/11/15 00:28:17
Wasted reverse input drum, gotta get new one monday
Wasted reverse input drum, gotta get new one monday
0 2015/11/15 00:28:00
Trash in pan no chunks
Trash in pan no chunks
0 2015/11/15 00:27:43
0 2015/11/14 18:47:55
0 2015/11/14 18:47:45
0 2015/11/14 18:47:10
0 2015/11/14 18:46:35
0 2015/11/14 16:10:33
0 2015/11/14 16:09:33
Advertisement