Tuning, Diagnostics, Electronics, and Wiring HP Tuners | EFILive | Hand Held Programmers | Stand Alone PCM's | Electronics | Wiring Diagrams

Screwy o2 bank 1 readings--Help!?

Thread Tools
 
Search this Thread
 
Old 05-21-2007 | 03:36 PM
  #11  
trgrhpy's Avatar
Thread Starter
Teching In
 
Joined: Mar 2007
Posts: 8
Likes: 0
From: Colorado Springs, CO
Default

Okay, i had this posted on LS1trucks and, yes, there had been another post about this and I think that what they were saying was that bank2 has a different value than bank 1, and the Interceptor (others?) are not able to read it. Out of curiousity, if it's reading stoich, what does 450 equate to? Is there a table somewhere that might have that info, or is that just some top secret tuner lingo?
Old 05-21-2007 | 06:36 PM
  #12  
alanderson1978's Avatar
TECH Apprentice
iTrader: (1)
 
Joined: Nov 2006
Posts: 334
Likes: 0
From: Blytheville, AR
Default

I looked back at some of my old closed loop tuning and both my O2's bounce between about 80 and 800mV (Using HP Tuners).You can also see each bank injector pulse width adjusting independently. My 2005 might me slightly different though. 450 is just the millivolt reading of the sensor, and indicates it is reading stoic. (14.7:1). Lower mV is leaner and higher mV is richer.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
97sicksled
Tuning, Diagnostics, Electronics, and Wiring
4
06-16-2007 12:35 PM
CurtD
Tuning, Diagnostics, Electronics, and Wiring
5
01-07-2006 10:08 PM



Quick Reply: Screwy o2 bank 1 readings--Help!?



All times are GMT -5. The time now is 05:58 PM.