WTT: WS6 6-speed for Truck
#1
Looking for a nice, CLEAN truck. Nothing real specific but prefer RCSB. MUST be a V8, Can't be rusty!
Here's my beauty!
1997 Trans Am WS6
6-speed
Red Exterior
Brand new Red Leather interior
Built 355 LT1, AI heads/Intake/valvetrain
-Solid Roller cam set-up (spins to 7400)
LS1 24x PCM Conversion
Tuned by Dr. Phil made 429rwhp
Longtubes with a custom single 4" Exhaust, sounds exactly like no other f-body out there with the solid roller cam thumping through the 4" exhaust.
12-bolt rear end with 4.10's
Liberty Gears T56 with new clutch recently
Tons of BMR suspension (tq arm, LCAs, PHR, front lower a-arms)
C5 front brake conversion
Alternator relocation, A/C removal (I have the condenser and other parts for it I believe to put back on if you want to move the alternator back up top)
I know I am missing a ton, but that is the jist of it.
I just put the red leather in and it really sets it off.
I drive the car purely on the street, and never have any issues, awesome car to cruise around in.
Tons of money invested as you can see from the above list.
End of the day however, it is just an LT1..... but it is about as strong of an LT1 you will find, beat heads/cam LS1 cars, and the sound from it simply is jaw dropping with the Solid Roller Valvetrain.











Video does it absolutely no justice on the sound

Trade Value: $12,500
Here's my beauty!
1997 Trans Am WS6
6-speed
Red Exterior
Brand new Red Leather interior
Built 355 LT1, AI heads/Intake/valvetrain
-Solid Roller cam set-up (spins to 7400)
LS1 24x PCM Conversion
Tuned by Dr. Phil made 429rwhp
Longtubes with a custom single 4" Exhaust, sounds exactly like no other f-body out there with the solid roller cam thumping through the 4" exhaust.
12-bolt rear end with 4.10's
Liberty Gears T56 with new clutch recently
Tons of BMR suspension (tq arm, LCAs, PHR, front lower a-arms)
C5 front brake conversion
Alternator relocation, A/C removal (I have the condenser and other parts for it I believe to put back on if you want to move the alternator back up top)
I know I am missing a ton, but that is the jist of it.
I just put the red leather in and it really sets it off.
I drive the car purely on the street, and never have any issues, awesome car to cruise around in.
Tons of money invested as you can see from the above list.
End of the day however, it is just an LT1..... but it is about as strong of an LT1 you will find, beat heads/cam LS1 cars, and the sound from it simply is jaw dropping with the Solid Roller Valvetrain.











Video does it absolutely no justice on the sound
Trade Value: $12,500
Thread
Thread Starter
Forum
Replies
Last Post
Suburban2500
INTERNAL ENGINE MODIFICATIONS
31
Jul 19, 2015 04:50 PM
Mossyoakglock
GMT 900 Trucks General Discussion
0
Jul 17, 2015 08:30 AM
Nimoryan
GMT 800 & Older GM General Discussion
0
Jul 5, 2015 03:50 PM



