silverado ss crew cab clone on intros
12-02-2014, 07:50 PM
#1
silverado ss crew cab clone on intros
Well been thinking of selling my 06 crew cab clone it was my first truck so shes always been taken good care of she has a clean title and i've been the only owner.Its white/tan interior around 95k original miles engine and tranny have around 3-4kmiles
Engine
6.0 aluminum block out of a 2009 had reluctor wheel swapped to 24x tooth
Tsp 229/236 cam*
Pac1518 springs singlebeehive hold.650 lift
Ported,milled .040,valve job set of ls3 head
Arp rod bolts
Arp head bolts
160℉ thermostat
Ceramic pacesetter headers
X link with nbs truck intake
VIP tune by KHP
Fully bolt on minus pulley
Transmission
Fully built jr tranny
4k pi multi-disk stall
Tranny cooler
Suspension
6/11 drop the right way
Front
3"djm drop arms
3" drop springs
Toxic Drop shocks
Rear
Djm flipkit
Weld in c-notch
Shackles
Airshocks*
Truck has a really smooth ride for being as low as she is and dosent wear out the tires cause of bad alignment
Wheels
intro 22x10 295 30 22 front
intro 24x10 295 30 24 rear deep dish
Body
fiberglass wiper cowl
All oem ss claddings
Ss front bumper
Ss rear bumper
Ss intimidator wing*
Shaved tailgate
All oem ss badges on the doors and tailgate
2 Sunroof(like 36x20)1 on front and 1 on back
All color matched*
Interior
Tan cloth interior with white color matched plastics
Db drive components
Panasonic touch screen radio
Rearend
Stock g80
narrowed with moser axles
3.73 gears
Might be forgetting other stuff about her engine has only been installed for like 3-4k miles and stall was restalled and tranny freshened around the same time so the drive train is basically new or can sell it with her original 5.3 with a rk cam and milled heads for cheaper price asking price is 15.5kobo like it sits
If intrested call or text (956)289-3876 (leo) and i'll get back to you asap
Alot of people that kno my truck know it's been well taken care of just have to many projects and not enough time for them I've only used this one a couple times this whole year
Engine
6.0 aluminum block out of a 2009 had reluctor wheel swapped to 24x tooth
Tsp 229/236 cam*
Pac1518 springs singlebeehive hold.650 lift
Ported,milled .040,valve job set of ls3 head
Arp rod bolts
Arp head bolts
160℉ thermostat
Ceramic pacesetter headers
X link with nbs truck intake
VIP tune by KHP
Fully bolt on minus pulley
Transmission
Fully built jr tranny
4k pi multi-disk stall
Tranny cooler
Suspension
6/11 drop the right way
Front
3"djm drop arms
3" drop springs
Toxic Drop shocks
Rear
Djm flipkit
Weld in c-notch
Shackles
Airshocks*
Truck has a really smooth ride for being as low as she is and dosent wear out the tires cause of bad alignment
Wheels
intro 22x10 295 30 22 front
intro 24x10 295 30 24 rear deep dish
Body
fiberglass wiper cowl
All oem ss claddings
Ss front bumper
Ss rear bumper
Ss intimidator wing*
Shaved tailgate
All oem ss badges on the doors and tailgate
2 Sunroof(like 36x20)1 on front and 1 on back
All color matched*
Interior
Tan cloth interior with white color matched plastics
Db drive components
Panasonic touch screen radio
Rearend
Stock g80
narrowed with moser axles
3.73 gears
Might be forgetting other stuff about her engine has only been installed for like 3-4k miles and stall was restalled and tranny freshened around the same time so the drive train is basically new or can sell it with her original 5.3 with a rk cam and milled heads for cheaper price asking price is 15.5kobo like it sits
If intrested call or text (956)289-3876 (leo) and i'll get back to you asap
Alot of people that kno my truck know it's been well taken care of just have to many projects and not enough time for them I've only used this one a couple times this whole year
Last edited by 4doorsssilverado; 01-09-2015 at 07:08 PM.
02-17-2016, 10:08 AM
#5
TECH Enthusiast
Good looking truck. First SS clone I've seen as a CC, most are RC.
Edit - dayum, just went back and saw the price. Seems like a hell of a deal!
Richard
Edit - dayum, just went back and saw the price. Seems like a hell of a deal!
Richard
